Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

64 case studiesPage 7 of 8
USS Monitor cleaned with dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Civil War Ironclad Artifacts Conserved With Zero Surface Damage

The Mariners' Museum and Park needed to remove nearly 140 years of embedded corrosion from massive USS Monitor artifacts, including its 9-foot gun turret, without damaging the fragile wrought iron. After two years of testing, Cold Jet dry ice blasting proved it could strip corrosion with zero surface damage, cutting weeks of hand cleaning to about an hour per plate.

Cold Jet
Cold Jet
5 min read
Vernay Laboratories, Inc. cleaning molds with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Rubber Mold Cleaning Time Cut From 6 Hours to 30 Minutes

Vernay Laboratories, a fluid control components maker for automotive, medical, and consumer industries, was losing 6-8 hours of production time each time molds were pulled from hot presses for cleaning. Cold Jet's i3 MicroClean dry ice system let Vernay clean molds in place, cutting cleaning time to just 30 minutes and extending production runs.

Cold Jet
Cold Jet
6 min read
Werner Breitschädel plastic mold cleaning with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Precision Plastic Molder Cuts Mold Cleaning From 4 Hours to 15 Minutes

Werner Breitschädel GmbH manufactures precise plastic parts for electrical, railway, aviation, and automotive customers where fire-retardant outgassing fouls filigree injection molds. Ultrasonic bath cleaning meant removing and disassembling molds, costing at least four hours per cycle. Cold Jet's i3 MicroClean shaved dry ice system now cleans molds in place in about 15 minutes.

Cold Jet
Cold Jet
6 min read
B 17 Aircraft parked on air strip
Aerospace & DefenseWhat Is Dry Ice Blasting?

Dry Ice Blasting Restores WWII B-17 Bomber and Vintage Fire Truck

The Mighty Eighth Air Force Museum needed to strip decades of grease, grime, and chipped paint from a WWII-era B-17G bomber and a 1941 Ford fire truck, but power washers and steam cleaners did not work indoors. Inspired by the Memphis Belle's restoration, the museum adopted Cold Jet dry ice blasting, dramatically increasing efficiency without explosive media or secondary waste.

Cold Jet
Cold Jet
5 min read
Cleaning an injection mold in situ with precision blaster
Automotive ManufacturingWhat Is Dry Ice Blasting?

Automotive Injection Molder Increases Uptime 25% with Dry Ice Blasting

A. Raymond, a global automotive fastener manufacturer, needed to remove flame-retardant coating buildup from injection mold cavities every two to three days without disassembling the tools. Cold Jet's i3 MicroClean system let technicians clean molds in place in under 45 minutes, thereby increasing process uptime by 25%, reducing labor, and paying for itself in under a year.

Cold Jet
Cold Jet
5 min read
Auschwitz artifacts restored with dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Preserves Artifacts at Auschwitz-Birkenau Memorial

The Auschwitz-Birkenau Memorial needed to clean fragile metal and ceramic artifacts such as prisoners' bowls, spoons, and ceramics for a new exhibition hall without water or chemicals that could damage them. Cold Jet and distributor ACP donated an i3 MicroClean system, letting conservators clean artifacts safely without abrasion or moisture.

Cold Jet
Cold Jet
5 min read
brinkmann plastic mold cleaning with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Injection Molder Cuts Mold Cleaning Time from 6 Hours to 45 Minutes

Brinkmann Formenbau, a German toolmaker serving the automotive, agriculture, sanitary, and medical industries, needed a faster, safer way to clean delicate mold surfaces without scratching them. Cold Jet's i3 MicroClean cut cleaning time for large molds with sliders from 6 hours with 2-3 workers down to about 45 minutes, cleaning without chemicals.

Cold Jet
Cold Jet
4 min read
Cedar log home restoration with dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Homeowner Restores 15-Year-Old Cedar Log Home Without Wood Damage

A 15-year-old cedar log home in Bonfield, Ontario had built up layers of failing stain, dirt, and mold that needed removal before restaining, without water damage or abrasive blasting media. Bonazza Dry Ice Blasting used Cold Jet's Aero 40 to strip 1,600 square feet of exterior surface cleanly, saving 3-4 days versus sand or corn cob blasting.

Cold Jet
Cold Jet
4 min read
Hightstown Civil War Memorial
Contract CleaningWhat Is Dry Ice Blasting?

Dry Ice Blasting Restores Civil War Monument in Less Time and Cost

A Civil War memorial in Hightstown, NJ, carved from delicate white Italian marble, needed cleaning before its 150th anniversary without damaging intricate carvings. Contractor USCleanBlast.com used dry ice blasting instead of the specified soda blasting, restoring it in 1.5 days for $7,000 — 56% less than the $16,000 soda blasting quote.

Cold Jet
Cold Jet
7 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.