i3 MicroClean front

Cold Jet — Precision Cleaning i3 MicroClean® Dry Ice Blaster

MicroParticle Dry Ice Blaster

The Cold Jet i3 MicroClean® is a precision dry ice blasting system built for cleaning delicate surfaces, complex cavities, and tight crevices that standard blasters can't address. Featuring Cold Jet's patented shaved MicroParticle technology, it delivers controlled blasting at 20–140 psi with as little as 12 CFM of compressed air. Table-top footprint with a transport cart included.

Weight
130 lb
Nozzle Air Consumption
12–50 cfm
Blast Medium
Dry ice block
Blast Pressure Range
20–140 psi

$31,950

Select Package


Qty
1
  • 24/7 Technical Support
  • 13 months Warranty
Americas
At a Glance

Why Choose the i3 MicroClean for Precision Cleaning?

Not every cleaning challenge calls for more power — some call for more control. The i3 MicroClean is purpose-built for applications where substrate integrity, geometric complexity, and contamination sensitivity make conventional blasting unsuitable.

Dimensions (L × W × H)
22 × 16 × 21 in
Weight
130 lb
Dry Ice Capacity
20 lb
Variable Feed Rate
0–1.2 lb/min
Blast Pressure Range
20–140 psi
Power Supply
1 × 110–240 V AC (50/60 Hz)
Compressed Air Supply
50–140 psi
Nozzle Air Consumption
12–50 cfm
Blast Medium
Dry ice block

Compliant with EU Machinery Directive (CE) and UL Design Standards.

Built to Perform

What Makes the i3 MicroClean Stand Out?

Every design element of the i3 MicroClean is optimized for precision, accessibility, and ease of use in sensitive environments.

i3 MicroClean front

Interactive 3D

  1. Technology

    Patented MicroParticle Technology

    Proprietary technology shaves block or pellet dry ice into ultra-fine MicroParticles for precise, delicate cleaning. Uses less air and produces less noise.

    Lead Feature
  2. Technology

    Accepts Dry Ice Block or Pellets

    Standard configuration runs on block dry ice for MicroParticle shaving. The optional DX upgrade adds compatibility with pellets.

  3. Performance

    Low Air Consumption

    Operates at as little as 12 CFM — Cold Jet's lowest air requirement — without compromising cleaning quality.

  1. Performance

    Full Variable Pressure Range

    Blast pressure adjusts from 20 to 140 psi. Dial in the right cleaning power for each substrate.

  2. Design

    Table-Top Footprint with Cart

    Compact enough to sit on a workbench or cart. The included mobility cart makes transport between stations and work cells easy.

  3. Operation

    Low Noise Operation

    Lower pressures and smaller particles produce dramatically less noise than conventional blasters. Enables operation in noise-sensitive facilities.

  4. Maintenance

    Removable Panel Design

    Accessible components behind removable panels make maintenance faster and less disruptive.

  5. Safety

    Integrated Static Bonding Cable

    Supplied grounding cable bonds the target surface to reduce electrostatic discharge during cleaning.

Why Dry Ice Blasting

Why Choose Dry Ice Blasting with the i3 MicroClean?

Dry ice blasting eliminates the trade-offs of conventional cleaning — delivering precision results with no chemicals, no water, no abrasion, and no waste.

Non AbrasiveSoft Media

Cleans Without Etching or Profiling

Dry ice is a very soft media (1.5–2 on the Mohs Scale of Hardness) and can clean most surfaces without etching, profiling, or changing surface dimensions.

Food Grade SafeSafety

Non-Toxic

Dry ice is a food grade media approved for use in FDA and USDA inspected facilities. It is colorless, tasteless, odorless, and non-toxic.

Non ConductiveSafety

Non-Conductive

Dry ice is non-conductive and will not cause corrosion or rusting of surfaces. It also allows for electrical equipment to be safely cleaned.

Dry Process / No WaterProcess

Completely Dry

No water, no moisture. Eliminates drying time and removes the risk of corrosion and damage to sensitive mechanical or electrical assemblies.

Secondary WasteFaster Cleanup

Dramatically Less Cleanup Time

Dry ice sublimates completely on contact. Only the removed contaminant remains for disposal, which dramatically reduces cleanup time and waste handling costs.

A Better CleanUptime

Cleans Equipment Online

Clean equipment in place to significantly reduce maintenance windows and maximize production availability.

Operator Safe / Non ToxicSafety

Eliminate Chemicals

Eliminates chemical cleaning solvents — reducing exposure risk for workers and removing the environmental burden of hazardous waste handling and disposal.

Zero Sublimation LossSustainability

Dry Ice = Recycled CO₂

Dry ice is made from recycled CO₂ collected from other industrial processes. No new greenhouse gases are produced or added to the atmosphere.

Validated Use Cases

Where Is the i3 MicroClean Used?

From cleanrooms to precision mold shops, the i3 MicroClean delivers where conventional blasting can't — validated across a wide range of detail-critical industries and applications:

The Science

How Does Dry Ice Blasting Work?

Dry ice blasting combines three primary factors to remove contaminants: Kinetic Energy, Thermodynamic Shock, and Thermal-Kinetic Effect.

Step 01

Supersonic

Dry Ice Velocity

Kinetic Energy

Dry ice is accelerated by compressed air through specially designed nozzles at supersonic speeds. The impact creates a kinetic energy effect that breaks the initial bond between contaminant and substrate.

  • 01. Kinetic Energy — Dry ice is accelerated by compressed air through specially designed nozzles at supersonic speeds. The impact creates a kinetic energy effect that breaks the initial bond between contaminant and substrate.
  • 02. Thermodynamic Shock — The temperature (−109°F) of the dry ice causes thermodynamic shock, which causes the contaminant to embrittle and shrink. This effect helps break the bond between the surface and the contaminant.
  • 03. Thermal-Kinetic Effect — On impact, dry ice instantly converts from solid to gas (sublimates) — expanding up to 800 times in volume in milliseconds. This rapid expansion gets beneath the contaminant and lifts it off the surface.

Dry ice blasting leaves zero secondary waste — the CO₂ sublimates completely, leaving only the removed contaminant for disposal.

Before You Blast

What Do You Need to Run the i3 MicroClean?

The i3 MicroClean requires three inputs to operate: compressed air, a standard electrical connection, and block or pellet dry ice.

  • Air Compressor
    01

    Compressed Air

    Shop Air or Portable Compressor — Required

    Shop air is sufficient for in-facility cleaning. A portable air compressor is required for mobile applications.

    An After Cooler is essential if you are using a portable compressor as your air source.

  • 110v electric power source
    02

    Electric Power Source

    Standard 110-Volt — Required

    • 110-volt standard outlet
    • No special wiring required
  • Dry Ice Supply
    03

    Dry Ice Supply

    Dry Ice — Required

    20 lb hopper capacity

    • Dry ice block
    • Pellets or nuggets only with the DX upgrade

    Contact Cold Jet to be connected with a local supplier.

Requirement 1 of 3
Compare the Lineup

See where this blaster fits

Compare the full Cold Jet lineup on the six factors that set each system apart. The system you’re viewing is highlighted; select any other row to learn more.

Cold Jet dry ice blaster lineup compared on Particle Control, Controls, Feeder Technology, Application Difficulty, Automation & Integration Capable, Dry Ice Capacity
ModelParticle ControlControlsFeeder TechnologyApplication DifficultyAutomation & Integration CapableDry Ice Capacity
i3 MicroCleanYou’re viewing
Microparticles (Shaved)
Analog / Standard
Radial Feeder
Delicate / Precision
No
20 lb
Microparticles (Shaved)
Digital (7" LCD, Recipes, IoT)
Radial Feeder
Delicate / Precision
Yes
25 lb
Variable (0.3mm to 3.0mm, 28 sizes)
Digital (7" LCD, Recipes, IoT)
Two-Stage + Defrost Cycle
Delicate to Aggressive
Yes
60 lb
Standard (3mm)
Digital (7" LCD, Recipes, IoT)
Two-Stage + Defrost Cycle
Highly Aggressive / High Power
Yes
60 lb
Standard (3mm)
Analog / Standard
Advanced Radial Feeder
Moderate to Aggressive
No
40 lb
Standard (3mm)
Analog / Standard
Advanced Radial Feeder
Moderate to Aggressive
No
80 lb
Standard (3mm)
Analog / Standard
Horizontal Disk Dosing
Basic
No
20 lb
Standard (3mm)
Analog / Standard
Horizontal Disk Dosing
Moderate
No
44 lb
Host-Dependent (PCS or PLT)
Digital (12" LCD Touch Screen)
Dual-Hose & Patented Cone Nozzle
Most Aggressive (Paint/Coating Stripping)
Yes
i3 MicroClean

What Are the i3 MicroClean Specifications?

All specs extracted from the official Cold Jet data sheet. Use the toggle to switch between Imperial and Metric units.

Model: i3 MicroClean® — MicroParticle dry ice blaster
SpecificationImperial
Dimensions (L × W × H)22 × 16 × 21 in
Weight130 lb
Dry Ice Capacity20 lb
Variable Feed Rate0–1.2 lb/min
Blast Pressure Range20–140 psi

24/7 Technical Support

Local-to-you service network

With strategically placed technicians and a support team available 24/7, 365 days a year, Cold Jet is always within reach — whether you need technical troubleshooting, parts guidance, or advice on getting the most from your machine.

Peace of Mind

What Warranty Does the i3 MicroClean Include?

13-Month / 500-Hour Coverage

Parts protection against manufacturing defects, serviced exclusively by OEM technicians.

View full warranty & support details
Service Agreement

Cold Jet CONNECT® Complete Equipment Coverage

Machine documentation, extended warranty coverage, and priority technical support — everything you need to protect your investment and maximize uptime. Available in Connect Care and Connect Enterprise tiers.

Cold Jet CONNECT logo with tagline

Comes with your machine

Nothing to buy. What you get depends on the machine.

Machine Documentation

Included

No subscription to buy — it ships with the machine.

  • Online access to operator manuals, parts & accessories catalog, and on-demand training videos — included free with every Cold Jet dry ice blaster.

Extended Warranty, Discounts & Spare Parts Kit

Included

No subscription to buy — it ships with the machine.

  • Extend your standard manufacturer warranty up to 3 years total, receive 10% off all parts and accessories, and get an uptime critical spare parts kit.

Priority Support, Onsite Maintenance & Training

Included

No subscription to buy — it ships with the machine.

  • Receive priority access to certified Cold Jet technicians via phone, messenger, or video call, plus one annual onsite preventative maintenance inspection and certified technician training.
Explore Cold Jet CONNECT
Common Questions

Have Questions About the i3 MicroClean?

Ready to Get Started?

Ready to Try the i3 MicroClean?

The right precision cleaning solution depends on your substrate, contaminant type, and air supply — and Cold Jet's application experts have the knowledge to confirm the i3 MicroClean is the right for you.

Compare Models