Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

64 case studiesPage 5 of 8
Ski lift tower being prepared for painting with dry ice blasting at Nordic Mountain
General ManufacturingWhat Is Dry Ice Blasting?

Contractor Preps Ski Lifts for Painting in Half the Time with Dry Ice

Nordic Mountain ski resort needed weather-worn chairlift towers stripped of cracked paint before repainting, but mechanical grinders left residue and missed hard-to-reach spots. Contractor High Peaks Chairlift Painting used Cold Jet dry ice blasting instead, cutting prep time in half and extending the repaint cycle to 10-15 years.

Cold Jet
Cold Jet
7 min read
Performance Plastics technician cleaning an injection mold with Cold Jet i3 MicroClean dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Precision Plastics Manufacturer Extends Mold Running Time by 200-500%

Performance Plastics runs precision injection molds at extreme temperatures, where condensed volatiles clog vents and risk damaging molds worth up to $250,000; full teardowns cost 2 days and 16 man-hours. Cold Jet's i3 MicroClean now cleans molds in-place, extending running time between teardowns by 200-500% and halving cleaning staff.

Cold Jet
Cold Jet
8 min read
Preform Solutions technician cleaning an injection mold with Cold Jet i3 MicroClean
Plastics & CompositesWhat Is Dry Ice Blasting?

PET Molder Boosts Production and Cuts Cleaning Time to Minutes

Preform Solutions, a family-owned PET preform molder running eight machines around the clock, previously needed over five hours to chemically clean a 16-cavity mold and could not spot-clean during production runs. After adopting Cold Jet's i3 MicroClean and IcePress, thorough mold cleaning now takes under an hour, eliminating hazardous solvent exposure and reducing production interruptions.

Cold Jet
Cold Jet
6 min read
Progress Casting Group technician dry ice blasting a foundry mold
FoundryWhat Is Dry Ice Blasting?

Foundry Reduces Core Box and Mold Cleaning Time by 86% with Dry Ice

Progress Casting Group needed to remove refractory coatings and core residues without damaging mold vents or urethane, but sandblasting and manual brushing were slow, damaging, and unsafe. Cold Jet's shaved dry ice MicroParticle technology cut cleaning time by 86%, dropped labor from a multi-hour, multi-person job to one worker in 10 minutes, and paid for itself in a single month.

Cold Jet
Cold Jet
4 min read
Removing oil from marine hulls after an offshore spill
Contract CleaningWhat Is Dry Ice Blasting?

Contractor Cleans Over 1,000 Vessels After Deepwater Horizon Oil Spill

Following the 2010 Deepwater Horizon oil spill, over 7,000 vessels required decontamination without generating hazardous waste. GearClean deployed 35 Cold Jet dry ice systems across 24 stations along 200 miles of coastline, decontaminating over 1,000 vessels, eliminating an estimated 3 million gallons of hazardous waste, and cutting costs by roughly $720,000.

Cold Jet
Cold Jet
5 min read
1970 red corvette parts cleaned with dry ice blasting
Automotive ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Removes Debris and Grease from Delicate 1970 Corvette

Restoring a 1970 Corvette required cleaning delicate instrument gauges before repainting, but hand cleaning, solvents, and abrasive blasting all risked damage. Using a Cold Jet i3 MicroClean system and 100 pounds of dry ice, the restorer cleaned gauges, the alternator, and valve covers while also preserving original paint and serial numbers.

Cold Jet
Cold Jet
4 min read
‘Rising’ Sculpture Rejuvenated After Cleaning with dry ice blasting
Restoration & RemediationWhat Is Dry Ice Blasting?

22-Ton Stainless Steel Sculpture Restored to 'Like New' Condition

Toronto's 'Rising' sculpture, a 22-ton, $5 million stainless steel artwork, had accumulated a year of dust, soot, and acid-rain streaking. Hand cleaning was too risky and power washing would leave residue, so EcoJet used a Cold Jet Aero 40 HP system over 5 days and 3,200 pounds of dry ice, restoring it to like-new condition.

Cold Jet
Cold Jet
4 min read
dry ice cleaning an industrial robot
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Blasting Cuts Industrial Robot Cleaning Hours by 75%

Robot refurbisher RobotWorx needed to clean grime, welding residue, paint, and grease from used industrial robots without damaging sensitive electronics. A Cold Jet Aero Series dry ice system cut cleaning time per robot from a full day to under two hours, cutting solvent use by 75%, and adding about 15 years to robots' service life.

Cold Jet
Cold Jet
6 min read
Rolls Royce Aerospace jet engine cleaning with dry ice blasting
Aerospace & DefenseWhat Is Dry Ice Blasting?

Rolls Royce Cuts Jet Engine Compressor Blade Cleaning Costs by 90%

Rolls Royce needed a safer way to clean dirt and grime from titanium jet engine compressor blades, since manual scraping with chemicals was slow and risked worker injury and blade damage. After testing confirmed minimal impact on material microstructure, Rolls Royce adopted automated Cold Jet dry ice cleaning, cutting costs by 90% and improving turn time by 84%.

Cold Jet
Cold Jet
4 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.