Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

8 case studies
Geberit Mold Cleaning
Plastics & CompositesWhat Is Dry Ice Blasting?

Environmentally sustainable cleaning of plastic molds for the manufacture of sanitary products

Geberit, Europe's leading sanitary products manufacturer, needed to keep injection molding tools free of plastic outgassing residue and grease buildup without compromising its strict sustainability standards. After trialing Cold Jet's i3 MicroClean S4, Geberit cut cleaning time by about 50%, reduced downtime and labor, and ordered two systems for daily use at its Jona plant.

Cold Jet
Cold Jet
5 min read
Metal applications mfg cleans injection molds for plastic extrusion coating
Plastics & CompositesWhat Is Dry Ice Blasting?

Diehl Expands Production and Profitability with Dry Ice Blasting

Diehl Metal Applications needed to clean filigree, 0.8-gram injection-molded parts without damaging surface quality, but manual ultrasonic-bath and brush cleaning shut down production for two full shifts each week. Switching to the Cold Jet's i3 MicroClean dry ice system cut mold cleaning time from 16 hours to one hour, lifting plant availability 10%, and adding 500,000 parts of annual capacity.

Cold Jet
Cold Jet
6 min read
Marquardt GmbH injection molding facility using dry ice blasting for mold cleaning
Plastics & CompositesWhat Is Dry Ice Blasting?

Plastics Processor Reduces Mold Cleaning Time to Under 10 Minutes

Marquardt runs 100 injection molding machines producing 3,000 different products, and manual mold cleaning required full disassembly, costing four hours of downtime per cycle. Installing Cold Jet's i3 MicroClean-S4 system let operators clean hot molds in-press without disassembly, cutting cleaning time to just 5–10 minutes and improving consistency.

Cold Jet
Cold Jet
4 min read
Performance Plastics technician cleaning an injection mold with Cold Jet i3 MicroClean dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Precision Plastics Manufacturer Extends Mold Running Time by 200-500%

Performance Plastics runs precision injection molds at extreme temperatures, where condensed volatiles clog vents and risk damaging molds worth up to $250,000; full teardowns cost 2 days and 16 man-hours. Cold Jet's i3 MicroClean now cleans molds in-place, extending running time between teardowns by 200-500% and halving cleaning staff.

Cold Jet
Cold Jet
8 min read
Preform Solutions technician cleaning an injection mold with Cold Jet i3 MicroClean
Plastics & CompositesWhat Is Dry Ice Blasting?

PET Molder Boosts Production and Cuts Cleaning Time to Minutes

Preform Solutions, a family-owned PET preform molder running eight machines around the clock, previously needed over five hours to chemically clean a 16-cavity mold and could not spot-clean during production runs. After adopting Cold Jet's i3 MicroClean and IcePress, thorough mold cleaning now takes under an hour, eliminating hazardous solvent exposure and reducing production interruptions.

Cold Jet
Cold Jet
6 min read
Vernay Laboratories, Inc. cleaning molds with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Rubber Mold Cleaning Time Cut From 6 Hours to 30 Minutes

Vernay Laboratories, a fluid control components maker for automotive, medical, and consumer industries, was losing 6-8 hours of production time each time molds were pulled from hot presses for cleaning. Cold Jet's i3 MicroClean dry ice system let Vernay clean molds in place, cutting cleaning time to just 30 minutes and extending production runs.

Cold Jet
Cold Jet
6 min read
Werner Breitschädel plastic mold cleaning with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Precision Plastic Molder Cuts Mold Cleaning From 4 Hours to 15 Minutes

Werner Breitschädel GmbH manufactures precise plastic parts for electrical, railway, aviation, and automotive customers where fire-retardant outgassing fouls filigree injection molds. Ultrasonic bath cleaning meant removing and disassembling molds, costing at least four hours per cycle. Cold Jet's i3 MicroClean shaved dry ice system now cleans molds in place in about 15 minutes.

Cold Jet
Cold Jet
6 min read
brinkmann plastic mold cleaning with dry ice blasting
Plastics & CompositesWhat Is Dry Ice Blasting?

Injection Molder Cuts Mold Cleaning Time from 6 Hours to 45 Minutes

Brinkmann Formenbau, a German toolmaker serving the automotive, agriculture, sanitary, and medical industries, needed a faster, safer way to clean delicate mold surfaces without scratching them. Cold Jet's i3 MicroClean cut cleaning time for large molds with sliders from 6 hours with 2-3 workers down to about 45 minutes, cleaning without chemicals.

Cold Jet
Cold Jet
4 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.