Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

64 case studiesPage 6 of 8
Rossi’s Italian Restaurant restored with dry ice blasting
Restoration & RemediationWhat Is Dry Ice Blasting?

Dry Ice Blasting Removes Soot and Smoke Damage and Deodorizes Surfaces

Rossi's Italian Restaurant suffered fire and smoke damage; traditional restoration methods were estimated at 12-16 days and up to 12 workers. Advanced Indoor Air Quality Care used three Cold Jet Aero 40 dry ice systems with eight workers, finishing in about eight days, removing all charred wood, and saving an estimated $20,000 in labor.

Cold Jet
Cold Jet
4 min read
Cleaning a conveyor in a textile facility
TextilesWhat Is Dry Ice Blasting?

Dry Ice Blasting Removes Polymer Adhesions from Woven Screen Belts

The Saxon Textile Research Institute needed to clean polymer droplets from woven spunbond screen belts without damaging the fabric or pulling belts off the line. After testing water, CO2 snow, and standard dry ice pellets, Cold Jet's i3 MicroClean DX removed all polymer drops individually with no belt damage, using far less compressed air than other blasters.

Cold Jet
Cold Jet
7 min read
Plastic bottle manufacturing factory line
PackagingWhat Is Dry Ice Blasting?

Packaging Molder Cuts Mold Cleaning Time to Under 45 Minutes

Silgan Plastics' Toronto facility spent 2-3 hours manually cleaning each 72-cavity PET preform mold every 15,000 cycles with chemicals and hand tools, and still struggled with thorough cleaning. After adopting two Cold Jet dry ice blasting systems, cleaning time dropped to under 45 minutes, staffing needs fell, and the technology expanded to conveyor rollers and injection screws.

Cold Jet
Cold Jet
6 min read
split rock lighthouse restoration with dry ice blasting
Restoration & RemediationWhat Is Dry Ice Blasting?

Dry Ice Blasting Restores Historic Split Rock Lighthouse

Ahead of its 100th anniversary, Minnesota's historic Split Rock Lighthouse needed old paint, mold, and putty removed from cast iron surfaces without the residue problems of a prior soda blasting job. Veit & Company used Cold Jet's Aero Series to strip paint and clean the lantern room in four days without damaging the structure or its rare Fresnel lens.

Cold Jet
Cold Jet
6 min read
Shared Sutton Garten Building
Welding Gas SuppliersWhat Is Dry Ice Blasting?

Welding Supply Company Doubles Dry Ice Production Capacity

Sutton-Garten, a family-owned welding supply and industrial gas company, wanted to leverage its existing CO2 supply to enter the dry ice production market. After investing in Cold Jet pelletizers with Sub Cooling technology, dry ice grew to roughly 10% of company revenue, prompting Sutton-Garten to double daily production from 30 to 60 tons.

Cold Jet
Cold Jet
5 min read
1920s Pullman train car restored with dry ice blasting for the works restaurant in loveland, ohio
General ManufacturingWhat Is Dry Ice Blasting?

Historic 1921 Train Car Restored with Dry Ice Blasting Under 25 Hours

When The Works restaurant in Loveland, Ohio bought an 84-foot 1921 Pullman passenger car for a dining room expansion, owners needed to strip 90 years of paint and rust without a mess near active food service. Cold Jet loaned its Farrow System wet-abrasive equipment, stripping the exterior to bare metal in under 25 hours with minimal disturbance to the restaurant.

Cold Jet
Cold Jet
4 min read
Single seat formula race car cleaned with dry ice blasting
Automotive ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Removes University Racing Car Chassis Powder Coating

The University of Giessen's THM Motorsport team needed to remove powder coating from their Formula Student race car's tubular chassis to modify attachment points without damaging the delicate carbon and metal frame. Cold Jet dry ice cleaning removed the coating with no secondary waste, helping the team place 23rd of 74 competitors and win a special award for best-prepared vehicle.

Cold Jet
Cold Jet
5 min read
Restored Blue General Toro Tractor Wagon
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Restores Arnold Palmer's Antique Toro Golf Tractor

Restoration contractor Dave Otterdahl bought a rare 1941 Toro General Golf Utility Tractor autographed by Arnold Palmer and needed to remove decades of paint and rust without warping the historic metal. Midwest Dry Ice Blasting combined the Farrow System, Cold Jet dry ice blasting, and a blast cabinet to fully restore the tractor in just 12-14 hours.

Cold Jet
Cold Jet
7 min read
computer motherboard and colored computer power cables cleaned with dry ice blasting
Automotive ManufacturingWhat Is Dry Ice Blasting?

Injection Mold Cleaning Cut From 12 Hours to 1 With Dry Ice Blasting

Tyco Electronics' automotive connector plant in Belgium needed to clean over 300 injection molds every 48 hours without risking damage from removing and transporting hot equipment. Cold Jet's i3 MicroClean shaved dry ice system let technicians clean molds in place, cutting a 6-12 hour process to about an hour and reducing cleaning crews from multiple workers to one.

Cold Jet
Cold Jet
8 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.