Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

12 case studiesPage 1 of 2
Benterud School paint removal with dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

City School Removes Failed Paint Coating Without Secondary Waste

A primary school in Lørenskog, Norway needed old paint and a surface polish layer removed from its brick and concrete exterior before repainting, without contaminating soil or disrupting students still in session. Dry ice blasting removed the paint and polish without creating secondary waste, and is expected to extend the repaint cycle to 10-15 years.

Cold Jet
Cold Jet
6 min read
robotic automotive weld line cleaning with dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Robotic Weld Lines Cleaned Safely With Less Labor and Lower Costs

Weld slag, spatter, and oil build-up on robotic welding jigs caused proximity-switch misfires, scrap, and equipment failure, and traditional hammer-and-chisel cleaning risked damaging the equipment. Maclellan Integrated Services switched to Cold Jet dry ice cleaning and cut labor by up to 69%, cut cleaning costs by up to 60%, and eliminated chemical solvents and secondary waste.

Cold Jet
Cold Jet
3 min read
Removing foam from inside of refrigerator
General ManufacturingWhat Is Dry Ice Blasting?

Electrolux Improves Sustainability Goals While Cutting Costs and Scrap

Electrolux's Nyíregyháza, Hungary factory used chemicals and hand tools to strip insulator foam from refrigerator shells, a slow process that risked scratching and scraping product. Three Cold Jet i3 MicroClean systems and an Ice Press let teams clean shells and tooling in place without disassembly, recovering the investment cost through scrap savings alone.

Cold Jet
Cold Jet
5 min read
Electric motor being cleaned with dry ice
General ManufacturingWhat Is Dry Ice Blasting?

Facility Saves 30–40% on Energy by Dry Ice Cleaning Electric Motors

Electric motors are typically pulled from service and hand-cleaned with rags and industrial solvents, a process often delayed to avoid production interruption, leading to inefficient motors and eventual failure. A facility that switched to Cold Jet dry ice blasting cleaned motors in place without disassembly, saw energy savings of up to 42 percent, and lower operating temperatures.

Cold Jet
Cold Jet
6 min read
Motor Yacht Titanic engine room being restored with Cold Jet dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Restores Super Yacht's Engine Room in Less Time

A mega-yacht conversion required its engine room with four $1M diesel engines to be cleaned of 40 years of grime and repainted within 30 days. Sand and soda blasting risked damaging sensitive equipment, and hand-cleaning would have taken a year. A four-person crew used Cold Jet dry ice blasting to safely restore the space to bare metal on schedule.

Cold Jet
Cold Jet
4 min read
Ski lift tower being prepared for painting with dry ice blasting at Nordic Mountain
General ManufacturingWhat Is Dry Ice Blasting?

Contractor Preps Ski Lifts for Painting in Half the Time with Dry Ice

Nordic Mountain ski resort needed weather-worn chairlift towers stripped of cracked paint before repainting, but mechanical grinders left residue and missed hard-to-reach spots. Contractor High Peaks Chairlift Painting used Cold Jet dry ice blasting instead, cutting prep time in half and extending the repaint cycle to 10-15 years.

Cold Jet
Cold Jet
7 min read
dry ice cleaning an industrial robot
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Blasting Cuts Industrial Robot Cleaning Hours by 75%

Robot refurbisher RobotWorx needed to clean grime, welding residue, paint, and grease from used industrial robots without damaging sensitive electronics. A Cold Jet Aero Series dry ice system cut cleaning time per robot from a full day to under two hours, cutting solvent use by 75%, and adding about 15 years to robots' service life.

Cold Jet
Cold Jet
6 min read
1920s Pullman train car restored with dry ice blasting for the works restaurant in loveland, ohio
General ManufacturingWhat Is Dry Ice Blasting?

Historic 1921 Train Car Restored with Dry Ice Blasting Under 25 Hours

When The Works restaurant in Loveland, Ohio bought an 84-foot 1921 Pullman passenger car for a dining room expansion, owners needed to strip 90 years of paint and rust without a mess near active food service. Cold Jet loaned its Farrow System wet-abrasive equipment, stripping the exterior to bare metal in under 25 hours with minimal disturbance to the restaurant.

Cold Jet
Cold Jet
4 min read
Restored Blue General Toro Tractor Wagon
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Restores Arnold Palmer's Antique Toro Golf Tractor

Restoration contractor Dave Otterdahl bought a rare 1941 Toro General Golf Utility Tractor autographed by Arnold Palmer and needed to remove decades of paint and rust without warping the historic metal. Midwest Dry Ice Blasting combined the Farrow System, Cold Jet dry ice blasting, and a blast cabinet to fully restore the tractor in just 12-14 hours.

Cold Jet
Cold Jet
7 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.