TEC1200 Rear Angle

Cold Jet — Dry Ice Blasting TEC™ 1200 Heat-Assisted Dry Ice Blasting System

Heat-Assisted Dry Ice Blasting

The Cold Jet TEC™ 1200 turns your Aero₂® ULTRA blaster (PCS® or PLT®) or legacy Aero₂® PCS® 60 blaster into a thermally enhanced dry ice cleaning system. Electrically heated air of up to 1,200°F increases air velocity by up to 70% and nearly triples particle impact force. That lets it strip paints, epoxies, and tough adhesives beyond the reach of standard dry ice blasting, with no abrasive media.

Control / Display
12 in
Automation Ready
Yes
Integration Ready
Yes

Request pricing

Qty
1
Compare
  • Non-Abrasive to Substrates
  • 13-Month Warranty

Documents

Americas
At a Glance

What Is Thermally Enhanced Dry Ice Blasting?

Thermally enhanced dry ice blasting combines heated compressed air with dry ice to remove tough coatings and adhesives that are difficult to clean with standard dry ice blasting. The heated air increases air velocity by up to 70% while softening or weakening the bonds of paints, epoxies, and adhesives. The −109°F dry ice then causes rapid contraction and bond failure. Dual hoses keep the dry ice and heated air separate until they meet at the patented Cone Nozzle, preventing premature sublimation.

Dimensions (L × W × H)
47.5 × 27.65 × 49.8 in
Weight
440 lb
Blast Pressure Range
40–145 psi
Power Supply
3 × 400–480 V AC
Compressed Air Supply
40–250 psi
Nozzle Air Consumption
150–180 cfm
Control / Display
12 in
Automation Ready
Yes
Integration Ready
Yes
Features

What Makes the TEC 1200 Stand Out?

The TEC 1200 adds controlled heat to your Aero2 ULTRA or Aero2 blaster.

TEC1200

Interactive 3D

  1. Performance

    Precisely Heated Air Stream

    Replaces ambient compressed air with electrically heated air of up to 1,200°F, adding thermal energy to every particle.

    Lead Feature
  2. Performance

    Up to 70% Higher Air Velocity

    Heated air increases entrained air velocity by up to 70%, nearly tripling the impact force of each dry ice particle.

  3. Technology

    Patented Cone Nozzle

    Injects dry ice into the heated air stream at the exact moment it exits the nozzle, maximizing kinetic impact and thermal transfer.

  1. Technology

    Dual-Hose Architecture

    Separate hoses isolate dry ice from heated air until the nozzle, preventing premature sublimation and preserving air temperature.

  2. Quality

    Aggressive Yet Non-Abrasive

    Strips coatings without profiling or damaging the substrate — dry ice is just 1.5–2.0 on the Mohs hardness scale.

  3. Control

    Heat as a New Cleaning Variable

    Set exit temperature alongside pressure, feed rate, and particle size, then save recipes that match each part and contaminant.

  4. Safety

    Safe Electric Heating

    A 40 kW electric heater generates heat with no combustible fuels or combustion emissions. Unlike laser cleaning, it requires no laser safety officer.

  5. Safety

    Layered Operator Protection

    A low-flow switch, internal dump valve, insulated cabinet, triple-layer aerogel hose, and insulated fittings protect the operator.

  6. Ergonomics

    Ambidextrous Insulated Applicator

    Swappable controls, a built-in rotary union, and a heat shroud keep the applicator cool, comfortable, and easy to maneuver.

  7. Quality

    No Condensation or Flash Rust

    Heated air keeps tooling above the dew point, leaving surfaces completely dry and ready for immediate processing.

  8. Integration

    Manual to Robotic Ready

    The nozzle core mounts to robotic arms, and a Modbus RTU kit lets the TEC1200 control the Aero2 PCS in automated cells.

  9. Sustainability

    Zero Secondary Waste

    Dry ice sublimates on impact, so there is no grit, chemical, or water waste to contain or dispose of.

Applications

What Can the TEC 1200 Remove?

The TEC 1200 removes paints, epoxies, and tough adhesives, handling tasks traditionally reserved for grit blasting, chemical stripping, or mechanical grinding without the associated profiling, substrate damage, or secondary waste.

Specifications

What Are the TEC 1200 Specifications?

Specs from the official Cold Jet TEC 1200 spec sheet, product book, and operator manual. Use the toggle to switch between Imperial and Metric units.

Model: TEC 1200 — Heat assist system for Aero2 ULTRA and Aero2 dry ice blasters
SpecificationImperial
Dimensions (L × W × H)47.5 × 27.65 × 49.8 in
Weight440 lb
Blast Pressure Range40–145 psi
Power Supply3 × 400–480 V AC
Compressed Air Supply40–250 psi
Accessories

Which Accessories Fit the TEC 1200?

The TEC 1200 works with a focused set of accessories for reach, comfort, safety, and integration. Insulated blast hoses come in multiple lengths and diameters, while support options help manage hose weight during blasting. Cold Jet can help you choose the right setup for your application.

Which applicator fits your application? — select one to view compatible nozzles

Select an applicator above to view compatible nozzles and specifications

Hoses, Kits & Operator Support

General Accessories — TEC™ 1200

TypePart #DescriptionFits
Accessories2K0745Aero2 PCS Heat Assisted Blast Attachment Kit — lets pneumatic power come from a secondary source (the TEC1200)Aero2 PCS
Integration Kits2K0252MODBUS RTU Integration Kit
Blast Hoses2N0901Braided stainless steel insulated blast hose, 1 in × 10 ftTEC1200
Blast Hoses2N0902Braided stainless steel insulated blast hose, 1.25 in × 10 ftTEC1200
Blast Hoses2N0904Braided stainless steel insulated blast hose, 1.25 in × 20 ftTEC1200

24/7 Technical Support

More than 70 people in Cold Jet's customer service organization, full spare parts inventory in every region, and support 24/7, 365 days a year — plus new operator training and application recipe development.

Warranty & Support

What Warranty and Support Does the TEC 1200 Include?

13-Month Coverage

Covers new equipment for 13 months from shipment or 500 operational hours, whichever comes first, for the original purchaser. Wear items such as hoses and control cables are excluded; extended programs are available.

View full warranty & support details
FAQ

Have Questions About the TEC1200?

Ready to Evaluate?

Ready to Remove What Dry Ice Couldn't Before?

Send us your toughest coating or adhesive. Our application team will develop a recipe — temperature, pressure, and particle size — for your part.

Compare Models