Documented Resultsfrom Cold Jet Customers

Real operations. Real numbers. Real results. See how manufacturers cut cleaning time, eliminated secondary waste, and improved worker safety with Cold Jet. Every story is told in their own words, from the problem they faced to the payback they measured.

Automated deburring parts with dry ice blasting
MAHLE Electric Drives (Taicang) Co., Ltd.

Automated Dry Ice Blasting Enables Systematic Deburring in Production

An automotive rotor manufacturer needed to deburr ultrasonically welded components without harming the airtight seal or introducing condensate that could fail leak testing. Cold Jet's COMBI 120H, an integrated dry ice pelletizing and blasting system, automated the process, which cut the rejection rate tenfold and reduced labor from eight workers to one.

By Cold JetBy Cold Jet
Dec 4, 20205 min read
Read the story

Proven Results

3 case studies

More Case Studies

64 case studiesPage 4 of 8
MERU Maharishi European Research University in Vlodrop Holland cleaned by dry ice blasting
Restoration & RemediationWhat Is Dry Ice Blasting?

Dry Ice Blasting Safely Cleans Europe's Largest Wooden Structure

Ahead of its 50th anniversary celebration, Maharishi European Research University needed its untreated wooden east façade restored within a tight four-week deadline, which had been affected by years of mold, moss, and dirt. Dry ice blasting cleaned the massive wood structure without water or chemical residue, avoiding any risk of contaminating the surrounding garden.

Cold Jet
Cold Jet
4 min read
Marquardt GmbH injection molding facility using dry ice blasting for mold cleaning
Plastics & CompositesWhat Is Dry Ice Blasting?

Plastics Processor Reduces Mold Cleaning Time to Under 10 Minutes

Marquardt runs 100 injection molding machines producing 3,000 different products, and manual mold cleaning required full disassembly, costing four hours of downtime per cycle. Installing Cold Jet's i3 MicroClean-S4 system let operators clean hot molds in-press without disassembly, cutting cleaning time to just 5–10 minutes and improving consistency.

Cold Jet
Cold Jet
4 min read
Dry ice blasting used to clean a precision medical device mold
Medical EquipmentWhat Is Dry Ice Blasting?

Medical Device Manufacturers Improve Quality and Reduce Scrap Rates

Medical device manufacturers face labor-intensive cleaning challenges from residue buildup in small mold cavities and on expensive precision tooling. Several replaced manual, abrasive cleaning with dry ice blasting, cutting mold cleaning time by up to 75 percent, dropping one catheter mold's cleaning time from an hour to 15 minutes, and saving tens of thousands of dollars annually.

Cold Jet
Cold Jet
8 min read
Technician cleaning injection molds with a Cold Jet i3 MicroClean dry ice blasting system at Miniature Precision Components
Automotive ManufacturingWhat Is Dry Ice Blasting?

Automotive Supplier Reduces Mold Maintenance Costs by 50% with Dry Ice

Miniature Precision Components needed to keep injection molds free of off-gassing residue that caused splays and burns, but manual chemical cleaning exposed workers to hazardous fumes near molds heated to 275°F. Switching to Cold Jet's i3 MicroClean dry ice blasting system cut mold maintenance costs by 50 percent and achieved return on investment within three months.

Cold Jet
Cold Jet
8 min read
Crawl space Before dry ice blasting
Restoration & RemediationWhat Is Dry Ice Blasting?

Mold Removed from Attic and Crawl Space With Dry Ice Blasting

Homeowners with moldy attics often face costly recommendations to tear off roofing and replace decking, while traditional sanding and chemical treatments are messy, odorous, and reintroduce moisture into wood. Adrian Environmental used Cold Jet's Aero 40 dry ice cleaning system to remove mold from attics and crawl spaces without chemicals, water, or secondary waste.

Cold Jet
Cold Jet
6 min read
Electric motor being cleaned with dry ice
General ManufacturingWhat Is Dry Ice Blasting?

Facility Saves 30–40% on Energy by Dry Ice Cleaning Electric Motors

Electric motors are typically pulled from service and hand-cleaned with rags and industrial solvents, a process often delayed to avoid production interruption, leading to inefficient motors and eventual failure. A facility that switched to Cold Jet dry ice blasting cleaned motors in place without disassembly, saw energy savings of up to 42 percent, and lower operating temperatures.

Cold Jet
Cold Jet
6 min read
Motor Yacht Titanic engine room being restored with Cold Jet dry ice blasting
General ManufacturingWhat Is Dry Ice Blasting?

Dry Ice Cleaning Restores Super Yacht's Engine Room in Less Time

A mega-yacht conversion required its engine room with four $1M diesel engines to be cleaned of 40 years of grime and repainted within 30 days. Sand and soda blasting risked damaging sensitive equipment, and hand-cleaning would have taken a year. A four-person crew used Cold Jet dry ice blasting to safely restore the space to bare metal on schedule.

Cold Jet
Cold Jet
4 min read
MWS Friedrichshafen foundry technician dry ice blasting a core box
FoundryWhat Is Dry Ice Blasting?

Dry Ice Blasting Does Faster Core Box Cleaning for European Foundry

MWS Friedrichshafen, an aluminum sand-casting specialist approved by nearly all German automakers, needed reliable, non-abrasive core box cleaning to maintain product quality. After 12 years of using dry ice blasting, the company adopted Cold Jet's Aero 40FP system, cutting cleaning times by up to 60% and reducing workstation noise enough to eliminate dual ear protection.

Cold Jet
Cold Jet
7 min read
Corn dust pile in ethanol plant
BiogasWhat Is Dry Ice Blasting?

In ethanol facility dry ice cleaning removes corn dust from economizers without the complications of water

New Age Cryo, serving 40 of roughly 190 U.S. ethanol plants, needed a better way to remove corn dust and refractory buildup from stack economizers without the risks and downtime of power washing. Switching to Cold Jet dry ice blasting cut stack temperatures by 40-60 degrees and saved ethanol plants an average of $100,000 per year in natural gas costs.

Cold Jet
Cold Jet
7 min read

About This Library

Every case study follows the same structure: the situation, the problem, the Cold Jet solution, and the measured result. The outcomes are quoted directly from the people who ran the equipment.

Cold Jet's case study library documents customer deployments of dry ice cleaning and dry ice production equipment across a number of industries. Each study identifies the contaminant and substrate, the cleaning method it replaced, the Cold Jet system deployed, and the outcome the customer reported, quoted directly wherever a customer statement is on record. Reported outcomes include reductions in cleaning time and unplanned downtime, elimination of secondary waste and chemical use, extended equipment life, and improved operator safety. The library exists so a customer evaluating dry ice blasting against pressure washing, sandblasting, or chemical cleaning can find a comparable substrate and process before running a trial. Studies can be filtered by industry and application, and span aerospace & aviation, automotive, food & beverage, foundry and more. Each study cross-links to the relevant equipment pages, application guides, and industry pages so readers can move from proof to product specification, and new deployments are added as customers document their results.

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.