Industry InsightsDry Ice Cleaning

The Advantages of Using Dry Ice Cleaning in Mold Maintenance

Steve Wilson
Steve Wilson
5 min read

TL;DR

The advantage of using dry ice blasting for cleaning molds is that it can remove contaminants from intricate mold shapes and tooling, even between the tightest of spaces, at varying tool temperatures and surface conditions. Molding machines can be cleaned in place with the need to disassemble parts, leading to less downtime and higher production.

Plastics and elastomer processors are under great pressure to increase the productivity of their plants, improve the quality of their parts, and reduce costs.

“

Manufacturers suffer millions of dollars in losses every year and experience hours of downtime because they fail to keep their machines optimized and calibrated for process reliability.

”
— Dietmar Juchmes, Vice President, Cold Jet Europe, Cold Jet

This is especially important in the plastics industry, which relies on sophisticated machines, such as all-electric servo platforms with a repeatability of four decimal places, and uses very scientific methods in its processes to produce its parts. However, many facilities are maintaining and cleaning with outdated and inefficient cleaning methods.

“

Unfortunately, most mold maintenance processes are in the state they were in when I started in the industry in 1977, and Cold Jet wants to change that.

”
— Steve Wilson, Director, Dry Ice Cleaning Applications, Cold Jet

It can be a balancing act between using the most effective technology and working within a tight budget.

Cold Jet’s goal is to provide plastic molding companies with the latest cleaning techniques so that they can be proactive and effective in mold maintenance. Currently, there are too many manufacturers that are very reactive in their mold maintenance procedures.

Maintaining and Cleaning Molds with Dry Ice Blasting

The magic of dry ice cleaning is that it is able to remove contaminants from molds and tooling, even between the tightest of spaces, at varying tool temperatures and surface conditions.

The dry ice cleaning process is non-abrasive and does not produce secondary waste, which allows highly sensitive molds to be cleaned in a fraction of the time and for the cycles between preventive cleaning to be extended. In addition, molds can be cleaned hot and online, without water or chemicals.

How dry ice blasting works

The main benefits of dry ice blasting are:

  • Improves product quality
  • No secondary waste
  • Reduces downtime
  • Reduces cleaning times and labor costs
  • In/online cleaning – little to no disassembly required
  • Non-abrasive - no damage to molds or tooling
  • Environmentally friendly

Dry ice blasting is the most effective option available when it comes to cleaning plastic molds on site without the risk of leaving residues, causing abrasion, or polluting the environment with harmful substances.

Learn about dry ice blasting in the plastics industry

“

Molds are mission critical and must be properly and efficiently maintained to ensure adequate uptime and part quality.

”
— Dietmar Juchmes, Vice President, Cold Jet Europe, Cold Jet

Plastic Manufacturers Are Benefiting from Dry Ice Blasting

Jokey is a global manufacturer of rigid plastic for the packaging industry. For Jokey, having properly maintained molds is very important for the finished product because it has a direct impact on the product quality.

Jokey's team cleans their molds at the end of each production cycle and each time the tools have to be modified or require maintenance. Prior to using dry ice blasting, cleaning was done by hand in-press or the mold was removed from the machine and then cleaned with cloths and cleaning products, such as aerosol food solvents or in a degreasing fountain.

Their previous cleaning method took between 30 - 120 minutes. In extreme cases a disassembly of the mold could be necessary, which resulted in a loss of up to three additional hours of production. These production stops could last between one to five hours and therefore generate significant production losses. When Jokey started production again, they would lose between 50 and 200 parts.

Dry ice cleaning supports Jokey's programs because it saves time, optimizes production, and improves the quality of cleaning. Cleaning time is reduced by about half and sometimes even more. The time saved is even more significant on a four cavity mold because there is much more cleaning to be done than on a smaller mold (one cavity).

plastic mold cleaning for performance with dry ice blasting
Plastic mold cleaning with dry ice blasting

Dry Ice Blasting Delivers Superior Cleaning Results

With dry ice, molds are cleaned more frequently, faster, more economically, and non-abrasively in a sustainable, environmentally friendly manner. It is a proven solution to productivity, quality, and cost reduction initiatives that many businesses are pursuing. Many injection molders have implemented proven manufacturing management methods, such as LEAN, 5S, and Total Productive Maintenance (TPM).

“

We work a lot with complex molds and our solutions allow manufacturers to deflash certain parts.

”
— Steve Wilson, Director, Dry Ice Cleaning Applications, Cold Jet

The company's solutions ensure that environmental and occupational safety issues are a top priority by reducing manufacturers' dependence on chemicals.

“

We don't provide a cleaning machine—we deliver a cleaning result for a customer.

”
— Steve Wilson, Director, Dry Ice Cleaning Applications, Cold Jet

Key Takeaways

  • Manufacturers lose millions of dollars every year from excessive downtime due to poor machine maintenance
  • Clean molds in between production cycles is mission critical for maintaining product quality standards
  • Dry ice blasting provides a fast, effective method for removing contaminants from molds and machines with needing to halt production or disassembly
Contact

Looking for a better, faster method to keep plastic molds clean?

Contact Cold Jet to explore dry ice blasting options for your operation!