PET Mold Cleaning in Action
Industries

Dry Ice Blasting Equipment for Packaging Manufacturing

Cold Jet dry ice blasting delivers industry-leading cleaning performance for high-speed packaging lines, converting operations, and plastic molding. By replacing manual scraping and chemical solvents with a non-abrasive, moisture-free process, facilities remove adhesives, inks, and residue from sensitive equipment in place, without disassembly or secondary waste, improving uptime and overall equipment effectiveness.

60–80%

Less Cleaning Time

Non-Conductive

Safe for Electronics

Zero

Secondary Waste

Contact Us
Overview

Summary

Cold Jet dry ice blasting cleans packaging lines, printing and labeling equipment, and plastic molds in-place without water, chemicals, or secondary waste. The non-abrasive, moisture-free process removes hot-melt adhesives, inks, resin, and product residue while equipment stays online – cutting cleaning time 60–80%, protecting precision tooling, and improving OEE.

Quick Answer

What is dry ice blasting used for in packaging manufacturing?

Dry ice blasting is a non-abrasive, non-conductive, moisture-free cleaning method used in packaging to clean packaging lines, printing and labeling equipment, and plastic molds. Solid CO₂ sublimates to gas on impact, removing hot-melt adhesives, dried inks, product residue, resin, and off-gassing buildup from seal bars, glue nozzles, conveyors, presses, and injection, blow, and thermoform molds—without water, chemicals, abrasion, or secondary waste. Because it adds no moisture and leaves no residue, equipment can be cleaned in-place while hot and online, with no disassembly or cooldown. Facilities consistently report 60–80% reductions in cleaning time and improved OEE through fewer line jams and better seal integrity. The process is safe for sensors, PLC panels, and mirror-finish molds, and because dry ice is an FDA food-grade media, it supports regulatory compliance for food-contact and pharmaceutical packaging. Cold Jet has more than 24,000 machines installed globally.

Packaging line being cleaned with dry ice blasting
Exploring dry ice blasting for your facility?Get expert guidance
Challenge

The Cost of Traditional Packaging Line Cleaning

Packaging equipment accumulates hot-melt adhesives, dried inks, resin, and product residue that slow lines and degrade quality. Traditional cleaning – manual scraping, solvents, even blowtorches – is labor-intensive, causes cumulative damage, creates VOC hazards, and forces cooldown and disassembly.

Cold Jet dry ice blasting is non-abrasive, non-conductive, and moisture-free. It reaches seal bars, glue nozzles, and mold cavities without disassembly, cleaning while equipment stays hot and online. Dry ice sublimates on contact, leaving no moisture or secondary waste – protecting sensors, PLC panels, and precision molds while improving OEE.

Non-Abrasive

Safe for Equipment

Clean In-Place

Little to No Disassembly

Zero

VOC Exposure

Less

Production Downtime

Benefits

Benefits of Dry Ice Blasting for Packaging Manufacturing

Maximize line uptime and throughput with precision dry ice cleaning

Cold Jet dry ice blasting is a non-abrasive, moisture-free process that removes adhesives, inks, and carbonized buildup without surface damage. Because dry ice sublimates on contact, it eliminates moisture and chemical residue—allowing operators to return equipment to production immediately.

Reduce DowntimeNo Disassembly

Clean Seal Bars and Nozzles In Place

Dry ice blasting reaches seal bars, hot-melt glue nozzles, and conveyor assemblies without disassembly. Facilities consistently report 60-80% reductions in maintenance windows. One corrugated printer reduced press cleaning from 16 man-hours to 45 minutes.

Increase Productivity & EfficiencyProductivity

Quantifiable Increase in OEE

In packaging, profit depends on machine utilization. By cleaning in-place, you eliminate the hours wasted on dismantling, cooling, and reassembling complex machinery.

Non AbrasiveNon-Abrasive

Safe for High-Precision Components

Cold Jet dry ice blasting will not damage glue nozzles, grippers, PLC panels, or mirror-finish molds. Maintaining equipment integrity ensures consistent seal quality and product appearance.

Operator Safe / Non ToxicSafety

Improved Safety and Ergonomics

Cold Jet dry ice cleaning eliminates repetitive manual scraping and exposure to hazardous VOCs—reducing operator strain and improving workplace safety.

Secondary WasteNo Waste

Zero Secondary Waste

Dry ice transitions directly from solid to gas, leaving no water, grit, or chemical media to collect. This eliminates hazardous waste disposal costs.

Applications

Dry Ice Blasting Applications for Packaging Manufacturing

Cold Jet dry ice blasting equipment provides cleaning and maintenance solutions across the packaging industry, from converting and printing operations to plastic molding.

Validated For
  • Converting Operations
  • Packaging Operations
  • Plastic Molding Operations

Converting & Packaging Operations

Converting and packaging operations struggle with accumulated ink, adhesives, varnish, and paper dust that manual cleaning with solvents cannot fully reach. Cold Jet dry ice blasting eliminates this stubborn buildup quickly and thoroughly, removing years of accumulation without damaging equipment surfaces or creating hazardous waste.

Printing Press and Gravure Equipment

Printing presses accumulate dried ink, varnish, and adhesive layers that reduce print quality. One converting operation cleaned a print stand with several years of accumulated ink that manual methods could not address. A corrugated packaging printer reduced cleaning from 16 man-hours to 45 minutes with Cold Jet dry ice cleaning.

Labeling and Adhesive Equipment

Glue nozzle heads and labeling systems develop stubborn buildup that causes production problems. Traditional methods involve blowtorches and scraping—creating VOC hazards and risking damage—or costly nozzle replacement. Cold Jet dry ice cleaning removes adhesive residue quickly without heat or harsh tools, reaching areas that manual cleaning cannot access.

Packaging Line Equipment

Conveyors, seal bars, box formers, orienters, grippers, and packers accumulate adhesives, product residue, carton dust, and grease that affect performance. One packaging facility quickly removed stuck-on glue with dry ice blasting that neither manual nor chemical cleaning could address. Components can be cleaned in-place, eliminating hours of disassembly and reassembly time.

Removing labels and adhesive from rolling conveyor with dry ice blasting
Removing labels and adhesive from rolling conveyor with dry ice blasting
Dry ice blasting cleaning food and bev packaging equipment
Dry ice blasting cleaning food and bev packaging equipment
Dry ice blasting cleaning gears and star wheels on packaging line
Dry ice blasting cleaning gears and star wheels on packaging line
Dry ice blasting cleans the following equipment in converting and packaging operations:
  • Formers & Packers
  • Weighers & Baggers
  • Glue Nozzle Heads
  • Palletizers
  • Printing Presses
  • Orienters
  • Labeling Equipment
  • Seal Bars
  • Heat Sealers & Hot Knives
  • Ink Trays & Stands
  • Conveyors & Rollers
  • Chain Rails

Plastic Molding Operations

Cold Jet dry ice blasting cleans plastic molds in place at operating temperature, eliminating disassembly and reducing cleaning downtime by up to 75%. This increases press uptime, lowers scrap rates, and extends the service life of high-value tooling.

Injection Mold Cleaning

Injection molds accumulate off-gassing residue and plastic resin that degrade part quality. Cold Jet dry ice cleaning removes these contaminants from cavities, vents, parting lines, and micropores while molds remain hot and in the press. A pharmaceutical bottle manufacturer reduced cleaning from 4 hours to 45 minutes—eliminating disassembly while protecting critical dimensions and mirror finishes.

Blow Mold and PET Mold Cleaning

Blow molds and PET preform molds develop stubborn off-gassing residue in backside tapers and air vents that traditional cleaning cannot adequately access. Cold Jet offers specialized nozzles that reach these difficult geometries effectively. One beverage bottler achieved 75% faster blow mold cleaning with Cold Jet dry ice blasting.

Thermoform Tooling

Thermoform tooling for food packaging and molded fiber products accumulates cellulose fibers, calcium deposits, and process residue. One molded fiber manufacturer reduced cleaning from over two hours to 30 minutes per mold using Cold Jet dry ice blasting—while eliminating the surface damage caused by manual scraping.

PET injection mold cleaned with dry ice blasting
PET injection mold cleaned with dry ice blasting
Cleaning a plastic bottle blow mold with dry ice blasting
Cleaning a plastic bottle blow mold with dry ice blasting
Dry ice cleaning of a plastic thermoforming mold
Dry ice cleaning of a plastic thermoforming mold
What You Need

What Do Packaging Manufacturers Need for Dry Ice Cleaning?

A professional dry ice cleaning setup for packaging facilities consists of the following components:

Dry ice blaster

Step 01

Dry Ice Blaster

The foundation of a dry ice cleaning process is a mobile, industrial-grade dry ice blasting unit designed for the tight footprints of packaging lines. Cold Jet provides a range of systems engineered for durability and ease of use, allowing maintenance teams to maneuver around conveyors, presses, and palletizers. Each blaster comes with blast and air hoses, an applicator, and a nozzle for your specific application.

  • 01. Dry Ice Blaster — The foundation of a dry ice cleaning process is a mobile, industrial-grade dry ice blasting unit designed for the tight footprints of packaging lines. Cold Jet provides a range of systems engineered for durability and ease of use, allowing maintenance teams to maneuver around conveyors, presses, and palletizers. Each blaster comes with blast and air hoses, an applicator, and a nozzle for your specific application.
  • 02. Compressed Air — Most packaging facilities have existing filtered air systems that can supply the required compressed air. Ensure your air supply meets the pressure and volume requirements for your selected dry ice blaster model.
  • 03. Dry Ice Supply — Consistent access to dry ice is essential for scheduled maintenance. We can help you identify a local supplier and recommend order quantities based on your cleaning schedule and volume.
  • 04. Machine and Operator Training — Getting the most from your dry ice blasting investment requires skilled operators. Cold Jet delivers hands-on training covering equipment operation, proper cleaning techniques, and safety protocols.
  • 05. Personal Protective Equipment (PPE) — Always ensure your cleaning team wears the correct safety gear, including gloves, hearing protection, and eye protection while operating your dry ice blaster.
Comparison

How Dry Ice Blasting Compares to Alternatives

See how dry ice blasting stacks up against traditional cleaning methods across the criteria that matter most in packaging operations.

Criteria
Dry Ice Blasting
Best
Chemical Cleaning
Manual Cleaning
Ultrasonic Cleaning
Laser Cleaning
Secondary Waste
None – sublimates to gas, no residue
High – spent solvents and wastewater
Moderate – used solvents, rags, scrapers
High – contaminated cleaning bath
Low – vaporized residue needs extraction
Speed
Fast – 60–80% less cleaning time
Slow – soak and rinse cycles
Slow – scraping is labor intensive
Slow – batch soak cycles
Slow – point-by-point on tooling
Equipment Damage
None – safe for molds and sensors
Possible – residue on components
High – scraping mars precision tooling
Low – but size-limited by tank
Possible – heat can alter surfaces
Regulatory Compliance
Strong – FDA food-grade, no chemicals
Limited – solvent and disposal rules
Inconsistent – operator dependent
Moderate – chemical bath disposal
Limited – VOC exposure
Downtime
Minimal – clean in-place, hot and online
High – disassembly and soak time
High – cooldown and teardown
High – remove parts to submerge
Moderate – setup per surface
Environmental Impact
Low – no water/chemicals, reclaimed CO₂
High – hazardous chemical disposal
Moderate – solvent and rag waste
Moderate – chemical bath disposal
Moderate – generates VOC & energy intensive
Comparing dry ice cleaning to your current method?Talk to an expert
Machine comparison

Compare Dry Ice Blasters for Packaging Lines

See how each Cold Jet blaster stacks up, so you can match the right machine to glue buildup, sealing jaws, conveyors, and forming equipment on your lines.

Aero2 pcs ultra
Aero2® PCS® ULTRA
Aero 40fp
Aero® 40FP
Microclean 2
i3 MicroClean® 2
Specification
Aero2® PCS® ULTRA
Aero® 40FP
i3 MicroClean® 2
Particle Control
Variable(0.3mm to 3.0mm, 28 sizes)
Standard(3mm)
Microparticles(Shaved)
Controls
Digital(7" LCD, Recipes, IoT)
Analog / Standard
Digital(7" LCD, Recipes, IoT)
Feeder Technology
Two-Stage + Defrost Cycle
Advanced Radial Feeder
Radial Feeder
Application Intensity
Versatile(Precision to Aggressive)
Moderate to Aggressive
Delicate / Precision
Automation & Integration Capable
Yes
No
Yes
Hopper Capacity
60 lbs(27 kg)
40 lbs(18 kg)
25 lbs(11 kg)
Ready to spec a machine?Request a quote
Why Cold Jet

Why Choose Cold Jet Machines for Packaging Manufacturing

Packaging operations demand equipment that performs reliably shift after shift. Cold Jet offers a comprehensive range of dry ice blasting machines engineered for the rigors of packaging manufacturing—delivering faster ROI, lower operating costs, and greater long-term value.

cold jet dry ice blasters

Trusted Packaging Industry Expertise

From injection molders running 24/7 operations to printers managing rapid changeovers, we understand the unique pressures packaging manufacturers face. Decades of experience across bottle manufacturing, flexible packaging, and food-contact containers translates into solutions tailored to your specific production environment.

Industry Leading Reliability

Packaging facilities can’t afford equipment failures during production runs. Our machines are engineered for continuous operation in demanding environments—standing up to daily use across multiple shifts.

Lower Operating Costs

Cold Jet machines consume significantly less dry ice, compressed air, and electricity than competing equipment—reducing your cost per cleaning cycle.

Unmatched Support and Training

Our service team provides rapid response for maintenance and troubleshooting. Training programs ensure your operators master equipment operation and cleaning techniques from day one.

Application-Specific Accessories

Cold Jet offers a wide range of nozzles, applicators, and accessories to match your specific cleaning requirements. We’ll help you select the right configuration to optimize results for your applications.

Ready to make the switch?Talk to us
Trusted by

Packaging manufacturers around the world rely on Cold Jet

With a global install base of more than 24,000 machines, Cold Jet is the trusted choice for dry ice cleaning in packaging operations worldwide.

  • Silgan plastics logo
  • Berry logo
  • logo transparent small compressor logo
  • Smurfit Westrock logo
  • Sonoco logo
  • tetra pak logo
  • Ball Corporation logo
  • Graham Logo
  • Huhtamaki logo
  • Pactiv logo
  • Plastipak Official Logo
  • Smurfit Kappa logo
Compliance

Supporting Food, Pharma & Safety Compliance

Dry ice blasting helps packaging operations meet food-contact, pharmaceutical, and worker-safety standards without water, chemicals, or secondary waste.

FDA Food-Grade

Food-Contact Compliance

Food and pharmaceutical packaging require cleaning that leaves no chemical residue or moisture on food-contact surfaces.

How We Comply

Dry ice is an FDA-approved food-grade media that uses no water or chemicals and leaves no residue, supporting regulatory compliance for food-contact and pharmaceutical packaging.

ATP Verified

Sanitation Standards

Packaging operations must verify cleanliness through sanitation testing before returning equipment to production.

How We Comply

Facilities report passing ATP sanitation testing after dry ice cleaning, confirming a thorough clean without chemicals or secondary waste.

Low VOCs

VOC Exposure Reduction

Manual scraping and solvent cleaning expose operators to hazardous VOCs and repetitive strain.

How We Comply

Dry ice blasting eliminates chemical solvents and manual scraping, reducing VOC exposure and operator strain for a safer workplace.

Need to meet a specific standard?Talk to an application specialist
FAQ

Frequently Asked Questions

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.