Case StudyAutomotive Manufacturing
Young Timer

YoungTimer, LLC

Dry Ice Blasting Delivers Show-Ready Classic Car Restorations

5 min read

TL;DR

A veteran automotive resale specialist needed precise control over blast intensity to clean classic cars, including cosmoline, road grime, and leather interiors, without damage that would lower resale value. The Cold Jet dry ice blaster, with fine-tunable pellet size, pressure, and volume, delivered a chemical-free, water-free clean that restored vehicles to original, show-ready condition.

The Challenge

Precision Cleaning Without Risking a Car's Resale Value

In the automotive resale industry, quality cleaning is essential to remove contaminants such as cosmoline, road dirt and grime, and also to break dust from the underside of vehicles. For difficult to reach places and interior or soft materials, a gentle touch is required.

Ales has been preparing and presenting tangible assets, such as cars, boats, airplanes, and anything with a motor, for sale for 40 years. While he’s been aware of dry ice cleaning for the past 10 years, he had not yet seen results that sold him on purchasing a machine.

His main concern was the lack of control over the dry ice blast stream. He knew that if the stream wasn’t delicate enough that it could lower the quality of his vehicles, and he wasn’t willing to take that risk.

Ales has tried all sorts of restoration and cleaning methods over the years, including dry ice, but wasn’t satisfied with “good enough.”

“

When it comes to dry ice cleaning, you have to have the settings in between a MicroClean system and a 3 mm pellet system. Cold Jet’s fragmenting nozzles are helpful, but they’re work arounds.

”
— Scott Ales, Owner & Lead Restorer

What he needed was greater control of particle size in order to preserve the high standard of quality for his vehicles.

Scott ales classic car restoration using dry ice blasting
The Solution

Cold Jet Dry Ice Blaster Gives Fingertip Control Over Every Variable

When Ales heard about the Cold Jet PCS 60 and saw a demonstration, he was hooked. The PCS 60 is Cold Jet’s groundbreaking dry ice blaster, equipped with a proprietary and patented Particle Control™ system, which gives the user complete control over particle size and allows them to fine-tune the most effective setting for each individual application.

He’s had the PCS 60 for about six months and the results have been “overwhelming and encouraging.” The vehicles are restored to their original glory, not hiding behind carefully taken pictures or remaining grit in corners. Ales can show his cars off with genuine pride at every step.

With an 8-10 hour cleaning time, he’s attained results that have generated astonishment in his online automobile community. If the incredulous responses don’t say enough about his results, he’s also gotten commissions for special projects.

“

The ability to control the size of the particle, the volume of the product going through the hose, the pressure, so easily, just with a dial…it was instantaneous results.

”
— Scott Ales, Owner & Lead Restorer

Ales said with a laugh that, “It felt unfair. I spent 40 years cleaning stuff.” After these results, he said he almost didn’t want to share his secrets because he knows he has the best tool in the industry.

The Results

Show-Ready Results in a Fraction of the Time, Without Water or Solvents

8-10

hours

Complete cleaning with the Cold Jet dry ice blaster with no water

500-1,000

lbs

Typical amount of dry ice used for a complete vehicle detail

Ales and his crew typically use 500 – 1,000 pounds of dry ice on a complete vehicle detail. This clean is completed without a drop of water, which Ales said is a huge mindset shift for him and his staff.

Another source of disbelief from friends has been that he cleans car interiors with dry ice. With the PCS 60, Ales can clean and restore leather seats and even electrical components.

“

We use over seven different nozzles and extensions. Without this variety, we would be unable to leverage the multitude of settings provided by the PCS 60. And without a doubt, [we] could NOT execute a full clean on the vehicles. With our continued effort to discover more cleaning and preparation solutions for the retail sector, I am certain we will expand our standard nozzle choices to a considerable amount moving forward.

”
— Scott Ales, Owner & Lead Restorer

He is now planning to design and build his first dedicated retail facilities where he will have a minimum of two PCS 60 machines always on site and one dry ice production machine as well.

Within that process, Ales intends to address the two most significant challenges that all automotive service environments have difficultly overcoming: noise and risk to nearby workers.

“

Occasionally, we need the serious end of the performance capability of the PCS 60. Meaning, the higher pressure and particle size settings, which can be loud - above what would be possible in a general work space environment without ear protection. This is considered a nuisance at minimum to nearby techs.

”
— Scott Ales, Owner & Lead Restorer

Ales is excited to continue learning new applications for his PCS 60, because of the “endless” possibilities he sees in store.

“

This is the most revolutionary thing I’ve come across in years. It’s a perfect fit in this industry. It’s perfect if you’re going to present anything that’s used online for sale.

”
— Scott Ales, Owner & Lead Restorer

With an 8-10 hour full cleaning cycle, Ales has produced results that generated astonishment in his online automobile community and earned commissions for special projects. He is now planning dedicated retail facilities equipped with multiple PCS 60 machines and his own dry ice production.

More about dry ice cleaning for cars

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.