dry ice blasting cleaning spray bar on asphalt distributor truck
Applications

High-Performance Dry Ice Blasting Machines for Asphalt, Bitumen, and Tar Removal

Cold Jet's dry ice cleaning machines deliver superior results for paving contractors, roofing manufacturers, and bitumen processors. By replacing manual scraping, hazardous chemicals, and pressure washing with a non-abrasive, completely dry process, businesses clean equipment in place up to 90% faster, eliminating chemical costs, fire risks, and secondary waste.

80–90%

Less Cleaning Time

Zero

Secondary Waste

Non-Abrasive

Safe for All Substrates

Contact Us
Overview

Summary

Cold Jet dry ice blasting removes asphalt, bitumen, and tar from paving, roofing, and processing equipment in-place—without chemicals, water, or secondary waste. The non-abrasive process strips hardened deposits from tack trucks, pavers, tanks, and conveyors up to 90% faster than manual scraping, without damaging steel, hydraulics, or electrical systems.

Quick Answer

How is dry ice blasting used in asphalt, bitumen, and tar removal?

Dry ice blasting is a non-abrasive, chemical-free method for removing asphalt, bitumen, tar, and tack compounds from paving, roofing, and bitumen-processing equipment. Solid CO₂ sublimates to gas on impact—using thermal shock and kinetic energy to crack hardened deposits and break their bond—stripping buildup from tack trucks, MTVs, pavers, spray bars, tanks and tank liners, conveyors, augers, chains, and sprockets. Because it is non-abrasive, it safely cleans steel, aluminum, rubber hoses, hydraulic lines, and electrical wiring in a single session without damage, and because it cleans equipment in-place—often while still hot, which is 3–5 times faster—operators cut cleaning time 80–90% and return assets to service immediately. It leaves no wastewater or media to reclaim, eliminating chemical costs (often $675+ per cleaning) and disposal, and it is non-flammable, replacing dangerous torch-and-scrape methods. Cold Jet has more than 24,000 machines installed globally.

dry ice blasting cleaning tanks at asphalt production plant
Exploring dry ice blasting for your facility?Get expert guidance
Challenge

Strip Hydrocarbon Buildup Without Chemicals or Torches

Asphalt, bitumen, and tar buildup fouls paving, roofing, and processing equipment, clogging nozzles, compromising product quality, and shortening asset life. Traditional removal is slow and hazardous: hand scraping takes a full day or more per vehicle with inconsistent results, chemical solvents cost hundreds of dollars per session and expose workers to toxic fumes, torch-and-scrape creates fire risk and can damage components, and pressure washing generates contaminated wastewater and fails on hardened deposits.

Cold Jet dry ice blasting is non-abrasive, chemical-free, and non-flammable. It cleans steel, hydraulics, and electrical systems in a single session, in-place and often while hot—3–5 times faster. Dry ice leaves no wastewater or media, so operators cut cleaning time 80–90% and return equipment to service immediately.

No Wastewater

No Reclamation or Permits

Clean Hot

Faster on Warm Equipment

Non-Flammable

No Torch & Scrape

No

Equipment Damage

Benefits

What are the Benefits of Dry Ice Blasting for Asphalt, Bitumen, and Tar Removal?

Dry ice blasting delivers significant time savings while eliminating chemical costs, secondary waste, and equipment damage

Dry ice blasting turns asphalt, bitumen, and tar removal from a multi-day, chemical-dependent job into a same-shift task. Cold Jet dry ice blasting systems use thermal shock to break the bond between hardened hydrocarbon deposits and the surface underneath, so crews clear buildup from fully assembled equipment in a fraction of the time, with no solvents, no wastewater, and no abrasive damage to steel, wiring, or hydraulics. The result is more equipment availability during paving season, lower cleaning cost per asset, and a safer job site.

Reduce DowntimeSave Time

Significant Time Reduction

Cold Jet dry ice blasting consistently reduces asphalt removal and bitumen cleaning time by 80-90% compared to manual methods. Paving equipment that takes one person a full day to clean with chemicals and scrapers can be cleaned in 1-2 hours with dry ice blasting. Cleaning bitumen from vehicles that previously took 2-3 days can be completed in 5-7 hours. Tank liner cleaning drops from 3-5 days to 2 days. This time savings translates directly to increased equipment availability and reduced labor costs for tank cleaning, truck cleaning, and paver maintenance.

ChemicalsNo Chemicals

Eliminates Chemical Costs and Hazards

Many businesses spend hundreds of dollars on chemical solvents per bitumen cleaning or asphalt removal project. Dry ice blasting eliminates these recurring chemical costs entirely while removing the risk of worker exposure to toxic fumes and skin contact hazards.

Secondary WasteNo Water

No Secondary Waste or Wastewater

Dry ice sublimates into CO2 gas upon impact, leaving no cleaning media or water behind. The only residue is the removed asphalt or bitumen, which remains uncontaminated and can be disposed of easily or even recycled. This eliminates the wastewater disposal challenges associated with hot steam pressure washing and the environmental concerns associated with chemical runoff.

Non AbrasiveNon-Abrasive

Non-Abrasive and Safe for All Substrates

Unlike wire brushing, bead blasting, or manual scraping, Cold Jet dry ice cleaning will not damage underlying surfaces. The process is non-abrasive, allowing operators to safely clean steel frames, aluminum tanks, plastic components, rubber hoses, electrical wiring, wiring harnesses, and hydraulic systems in a single session. This eliminates the selective cleaning required with hot steam pressure washers and chemical applications, making dry ice blasting particularly valuable for engine compartments and production machinery where multiple material types exist in close proximity.

Increase Productivity & EfficiencyNo Disassembly

Clean Without Disassembly

Cold Jet dry ice blasting enables equipment to be cleaned in-place without disassembly, dramatically reducing downtime and allowing assets to return to service immediately after cleaning. This is critical during paving season when equipment downtime directly impacts project timelines and revenue. Quickly removing asphalt buildup allows mechanics to access equipment components more easily, ensuring that repairs are expedited.

A Better CleanClean All Surfaces

Removes Buildup from Complex Geometries

Asphalt accumulates in chains, sprockets, auger assemblies, conveyor systems, and other hard-to-reach areas where scraping is impractical. Dry ice reaches these areas effectively, removing buildup from mass flow hoppers, windrow heads, remix paddles, and other intricate components that trap material.

Applications

What Asphalt, Bitumen, and Tar Removal Applications Benefit from Dry Ice Cleaning?

Dry ice blasting effectively removes asphalt, tar, bitumen, tack compounds, and related hydrocarbon buildup across paving operations, roofing manufacturing, asphalt and bitumen production, and equipment rental businesses. The following applications benefit from dry ice cleaning:

Validated For
  • Paving equipment and trucks
  • Asphalt and tack spray trucks
  • Roofing and shingle production machinery
  • Asphalt tank and tank liner systems
  • Rental equipment and fleet vehicles
  • Bitumen processing equipment

Dry Ice Blasting Removes Heavy Hydrocarbon Buildup Without Damaging Equipment

Dry ice blasting is a non-abrasive solution that removes stubborn asphalt, tar, and bitumen deposits while preserving equipment integrity and eliminating safety hazards.

Paving and Asphalt Equipment

On MTVs, tack trucks, pavers, and compactors, asphalt accumulates on truck frames, spray nozzles, and spray bars throughout the paving season. This accumulation reduces equipment performance and shortens asset life. Cold Jet dry ice blasting removes this buildup quickly—often in 1-2 hours versus a full day of manual scraping—allowing contractors to maintain their fleets between projects. Dry ice blasting cleans steel, aluminum, rubber hoses, and electrical components simultaneously without damage, eliminating clogged nozzles and mechanical issues that slow operations.

Asphalt and Bitumen Processing Equipment

In batch plants and drum plants, conveyors, storage bins, and tank systems develop heavy hydrocarbon deposits that impact production efficiency. Dry ice blasting reduces cleaning time dramatically—in some cases from 2-3 days to just 5-7 hours. Tank liners and tank surfaces can be cleaned without the wastewater disposal challenges of pressure washing.

Roofing and Shingle Production Machinery

Roofing manufacturers contend with asphalt and bitumen buildup on metal gears, discs, production line surfaces, and fiberglass-contaminated equipment. Dry ice blasting eliminates the secondary waste created by pressure washing and removes the need for hazardous chemical solvents and torches. With dry ice cleaning, production equipment can be cleaned in-place without extended downtime. The non-conductive process safely cleans electrical components and sensitive controls that other methods cannot touch.

Dry ice blasting cleaning spray bar on asphalt distributor truck
Dry ice blasting cleaning spray bar on asphalt distributor truck
Shingle manufacturer cleans asphalt from facility equipment with dry ice blasting
Shingle manufacturer cleans asphalt from facility equipment with dry ice blasting
Removing bitumen from back of a transport truck with dry ice cleaning
Removing bitumen from back of a transport truck with dry ice cleaning
Dry ice blasting removing asphalt from production equipment
Dry ice blasting removing asphalt from production equipment
Equipment We Clean
  • Material transfer vehicles (MTVs)
  • Asphalt pavers
  • Compactors/rollers
  • Stabilizers/reclaimers
  • Asphalt trucks
  • Tack trucks/spray trucks
  • Conveyors
  • Auger assemblies
  • Remix systems
  • Paddles
  • Mass flow hoppers
  • Windrow heads
  • Chains, sprockets, liners, & bearings
  • Tank liners
  • Interior and exterior tank surfaces
Industries

Dry Ice Cleaning Removes Asphalt, Bitumen, and Tar Across Multiple Industries

Cold Jet dry ice cleaning machines serve paving contractors, roofing manufacturers, bitumen processors, and equipment service providers who need reliable asphalt and tar removal in the following industries:

Comparison

How Dry Ice Blasting Compares to Alternatives

See how dry ice blasting stacks up against traditional cleaning methods across the criteria that matter most in asphalt, bitumen, and tar removal.

Criteria
Dry Ice Blasting
BEST
Chemical Cleaning
Manual Cleaning
Sand Blasting
Pressure Washing
Secondary Waste
None – sublimates to gas, no residue
High – spent solvents and wastewater
Moderate – scrapings and debris
High – spent abrasive media and dust
High – contaminated wastewater to treat
Speed
Fast – 80–90% less cleaning time
Slow – soak, scrub, repeat
Slow – scraping takes a full day
Slow – masking and cleanup add time
Slow – fails on hardened deposits
Equipment Damage
None – non-abrasive, safe on all substrates
Possible – corrosion and residue
High – scraping mars surfaces
High – abrasive, erodes surfaces
Possible – water harms electrical/hydraulics
Regulatory Compliance
Strong – no chemicals, no wastewater
Limited – solvent handling and disposal
Inconsistent – operator dependent
Limited – dust and containment rules
Limited – wastewater discharge permits
Downtime
Minimal – clean in-place, no disassembly
High – soak and dry time
High – full-day teardown and scraping
High – masking and cleanup
High – drying and re-cleaning
Environmental Impact
Low – no chemicals, reclaimed CO₂
High – toxic runoff and disposal
Moderate – solvent and debris waste
High – abrasive dust and disposal
High – wastewater and runoff
Comparing dry ice blasting to your current method?Talk to an application expert
What You Need

What Do You Need for Asphalt, Bitumen, and Tar Removal with Dry Ice Blasting?

Asphalt, bitumen, and tar removal with dry ice blasting requires the following essential components:

Dry Ice Blaster

Step 01

Dry Ice Blasting Machine

Asphalt, tar, and bitumen removal requires a dry ice blaster capable of aggressive, sustained cleaning power. Cold Jet dry ice cleaning machines deliver the performance needed to break through heavy hydrocarbon buildup while offering the versatility to adjust settings for different buildup levels and substrate types. All systems include blast and air hoses, applicators, and nozzles.

  • 01. Dry Ice Blasting Machine — Asphalt, tar, and bitumen removal requires a dry ice blaster capable of aggressive, sustained cleaning power. Cold Jet dry ice cleaning machines deliver the performance needed to break through heavy hydrocarbon buildup while offering the versatility to adjust settings for different buildup levels and substrate types. All systems include blast and air hoses, applicators, and nozzles.
  • 02. Compressed Air — Compressed air can be supplied from your facility’s existing filtered air system or from a portable compressor for field operations.
  • 03. Dry Ice Supply — Cold Jet can help you identify a dry ice supplier and recommend quantities based on your cleaning volume. Many paving and roofing operations establish delivery schedules aligned with their seasonal maintenance patterns.
  • 04. Operator and Machine Training — To ensure your team can effectively and safely use your dry ice cleaning equipment for asphalt and bitumen removal, proper training is essential. Cold Jet provides a comprehensive training course that equips operators with the necessary techniques and safety guidelines for optimal cleaning across different equipment types and contamination levels.
  • 05. Personal Protective Equipment (PPE) — Operators need appropriate safety gear including insulated gloves for dry ice handling, hearing protection, and eye protection.
Compare Machines

How Do These Dry Ice Blasters Compare for Asphalt Removal?

Side-by-side specs for the Cold Jet blasters built for tough buildup, so you can match cleaning power and mobility to paving equipment, truck beds, and plant components.

Specification
Aero2® PCS® ULTRA
Aero2® PLT® ULTRA
Aero® 40FP
Particle Control
Variable(0.3mm to 3.0mm, 28 sizes)
Standard(3mm)
Standard(3mm)
Controls
Digital(7" LCD, Recipes, IoT)
Digital(7" LCD, Recipes, IoT)
Analog / Standard
Feeder Technology
Two-Stage + Defrost Cycle
Two-Stage + Defrost Cycle
Advanced Radial Feeder
Application Intensity
Versatile(Precision to Aggressive)
Highly Aggressive / High Power
Moderate to Aggressive
Automation & Integration Capable
Yes
Yes
No
Hopper Capacity
60 lbs(27 kg)
60 lbs(27 kg)
40 lbs(18 kg)
Not sure which blaster fits your job?Get a recommendation
Why Cold Jet

Why Choose Cold Jet Dry Ice Blasting for Asphalt and Bitumen Removal?

If you’re upgrading from manual scraping, chemical cleaning, or pressure washing for asphalt removal or bitumen cleaning, investing in a Cold Jet dry ice blaster delivers measurable returns through time savings, eliminated chemical costs, and extended equipment life. Consider both the ROI and operational benefits when evaluating this investment.

cold jet dry ice blasters

Proven Performance on Heavy Hydrocarbon Buildup

Decades of field-tested results across paving operations, roofing manufacturers, and bitumen processors demonstrate Cold Jet’s ability to remove the most stubborn asphalt and tar accumulations.

Trusted Partner Across Industries

Cold Jet has more than 24,000 installed systems globally serving operations that encounter asphalt, tar, and bitumen contamination—from single-truck paving contractors to multi-location roofing manufacturers and international bitumen and asphalt processors.

Superior Reliability for Demanding Environments

Cold Jet equipment is engineered for the harsh conditions of paving yards, manufacturing plants, and field service operations. Our machines deliver years of dependable performance with minimal downtime, even when exposed to dust, debris, and temperature extremes.

Comprehensive Support and Training

Our field service specialists work with your team to optimize blasting parameters for your specific equipment types and contamination levels. Training covers techniques for different substrates and buildup severity, ensuring your operators achieve consistent results.

Lower Operating Costs

Cold Jet dry ice blasters use significantly less dry ice, compressed air, and electricity than competitor machines. These efficiency gains, along with eliminated chemical costs, accelerate payback and reduce ongoing operational expenses.

Application-Specific Accessories

Our range of applicators, hoses, and nozzles allows you to configure your system for everything from broad truck frame cleaning to detailed work on gears, chains, and electrical components.

Ready to make the switch?Talk to us
Trusted by

Asphalt removal and bitumen cleaning customers around the world rely on Cold Jet

With a global install base of 24,000+ systems serving companies of all sizes, Cold Jet delivers proven dry ice blasting solutions for asphalt, tar, and bitumen removal.

  • Seal Master clean asphalt sealcoating from equipment
  • Asphalt Paving System clean asphalt trucks
  • Central Specialties Inc asphalt truck cleaning
  • GAF logo
  • Certain Teed cleaning asphalt from gears and discs
  • Kankakee Valley Construction clean construction equipment
Compliance

Supporting Safety, Compliance & Sustainability

Dry ice blasting helps asphalt and bitumen operations meet worker-safety, fire-safety, and environmental goals without chemicals or wastewater.

OSHA Risk Reduction

OSHA Hazard Reduction

Chemical solvents and torch-and-scrape methods expose workers to toxic fumes, skin-contact hazards, and fire risk, creating OSHA concerns.

How We Comply

Dry ice blasting eliminates chemical solvents and torches with a non-toxic, non-flammable process, removing fume exposure and fire hazards and improving safety ratings.

No Wastewater

Wastewater and Runoff Control

Pressure washing and chemical cleaning generate contaminated wastewater and runoff that require permits, reclamation, and disposal, risking soil and groundwater contamination.

How We Comply

Dry ice sublimates on contact, leaving no wastewater, media, or chemical runoff—eliminating reclamation, permits, and the risk of soil and groundwater contamination.

Non-Destructive

Equipment Integrity

Abrasive and torch methods damage hydraulic lines, electrical wiring, and precision components on expensive paving and processing equipment.

How We Comply

The non-abrasive process safely cleans hydraulics, wiring, and precision bearings without damage, preserving equipment integrity and extending asset life.

Need to meet a specific standard?Talk to an application specialist
FAQ

Frequently Asked Questions

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.