Printer Improves Quality While Reducing Downtime and Scrap
Blog

Cold Jet dry ice blasting machines transform how printing operations approach equipment maintenance. By replacing hand scraping, chemical solvents, and time-consuming disassembly with a non-abrasive, waste-free process, print facilities clean ink trays, rollers, and press components in minutes, protect sensitive electronics, and reduce cleaning time by up to 80%.
60–95%
Less Cleaning Time
Chemical-Free
No Harsh Solvents
Non-Abrasive
Safe for Equipment
Summary
Cold Jet dry ice blasting cleans printing presses and components in-place without chemicals, water, or secondary waste. The non-abrasive process removes burnished ink, grease, and caked-on paper dust from rollers, anilox cells, ink trays, and electronic components while equipment stays online – cutting cleaning time 60–95% while reducing scrap and labor costs.
Dry ice blasting is a non-abrasive, chemical-free cleaning method used in printing to clean presses and components in-place—including flexographic, lithographic, gravure, and letterpress equipment, rollers, anilox cells, ink trays, laminators, journals, label equipment, and electronic sensors and controls. Solid CO₂ sublimates to gas on impact, removing burnished ink, adhesive, heavy grease, and caked-on paper dust from steel, aluminum, stainless, rubber, and plastic components without chemicals, water, or secondary waste. Because it is non-abrasive, it safely cleans delicate sensors and electronics, and because equipment is cleaned hot and online with little to no disassembly, printing operations report cleaning-time reductions of 60–95%. Cleaner machinery improves print quality and lowers scrap, while eliminating manual cleaning with harmful chemical solvents. Cold Jet has more than 24,000 machines installed globally.

Printing presses accumulate burnished ink, heavy grease, and caked-on paper dust that degrade print quality and raise scrap. Traditional cleaning with putty knives, wire brushes, and chemical solvents can take 24 to 36 hours, requires disassembly, and risks damaging sensitive components, so facilities delay maintenance and let buildup and quality issues compound.
Cold Jet dry ice blasting is non-abrasive and chemical-free. It cleans presses, rollers, anilox cells, and electronic components hot and online, with little to no disassembly. Printing operations report cleaning-time reductions of 60–95% – for example, press frame cleaning from 16 labor hours to 45 minutes – while leaving no secondary waste and protecting equipment.
Zero
Water or Secondary Waste
Non-Toxic
Safe Around Operators
Less
Labor Per Cleaning
In-Place
Clean Online
A faster, easier way to reduce downtime, eliminate chemicals, and improve print quality
Cold Jet dry ice blasting is non-abrasive, non-conductive, chemical-free, and effectively removes ink, adhesives, grease, and paper dust without damaging rollers, sensors, or delicate press components. Because dry ice sublimates upon impact, it leaves no moisture or residue behind—allowing equipment to return to production immediately after cleaning.
Facilities consistently report cleaning time reductions of 60-80% compared to manual methods. A flexible packaging manufacturer reduced frame cleaning from 16 labor hours to just 45 minutes with a single operator when switching to Cold Jet dry ice cleaning.
Dry ice blasting cleans equipment while fully assembled and often while components are still warm from production. This transforms cleaning from a major production disruption into a routine maintenance task.
Ink buildup on side frames, grippers, and rollers leads to alignment problems, ink spit, and inconsistent color across runs. Because dry ice delivers a deeper clean in far less time, facilities can perform thorough maintenance more frequently—catching buildup before it affects output quality.
Dry ice sublimates on impact and leaves no cleaning media behind. No chemical-soaked rags, no sorbent pads, no hazardous waste—just reduced disposal costs and less material headed to the landfill.
The non-abrasive and non-conductive process cleans delicate components without damage. Unlike scraping and wire brushing, dry ice blasting won’t wear down roller surfaces or damage sensitive sensors and delicate anilox cells.
Cold Jet dry ice blasting equipment serves cleaning and maintenance needs across multiple printing sectors, from commercial presses to flexible packaging and label lines.
Cold Jet dry ice blasting achieves a deeper clean in a fraction of the time and without disassembly, reducing cleaning time by 60 to 80% and enabling more frequent cleaning. This proactive maintenance increases press uptime, lowers scrap rates, and extends the service life of high-value tooling.
The core application for dry ice blasting in commercial printing is cleaning printing press components, rollers, journals, and ink handling systems. The process removes burnished ink, grease, and accumulated residue from flexographic, gravure, lithograph, and letterpress equipment. Dry ice blasting delivers the speed and efficiency needed without introducing moisture or solvents into the production environment. The non-abrasive nature of dry ice protects roller surfaces while removing stubborn contaminants.
Stainless steel ink trays, delivery units, and feeder systems accumulate heavy ink deposits that are time-consuming to remove manually. One commercial printer found that ink trays taking an hour to clean by hand required only 10 minutes with Cold Jet dry ice blasting. Beyond time savings, the process reaches corners and crevices that scrapers and rags miss, preventing the gradual buildup that affects ink transfer and print consistency.
Ink mist, grease, and paper dust accumulate in drive gears, deck guides, and bearing housings, leading to mechanical wear and registration errors. Cold Jet dry ice blasting reaches into intricate gear trains and journals to remove these contaminants without the need for disassembly. Maintaining clean drive components reduces friction and prevents the mechanical “slop” that causes misalignment and premature equipment failure.


Flexible packaging and label printing operations juggle multiple ink types, adhesives, and substrates. With tight production schedules, many facilities resort to outsourcing roller cleaning—an expensive approach that removes critical equipment from production for extended periods. Dry ice blasting brings this cleaning in-house while dramatically cutting cleaning time.
Flexible packaging printers running different inks and substrates need versatile cleaning solutions. Dry ice blasting adapts to these varying requirements, effectively removing both water-based and solvent-based inks along with the adhesive residue common in packaging applications. A corrugated cardboard printer achieved cleaning results 75% faster with dry ice blasting than their previous method of hand cleaning with water and chemicals, while a bag manufacturer reduced cleaning time from 24-36 hours down to 8 hours.
Laminating, coating, and metallizing equipment accumulates stubborn adhesive and residue in hard-to-reach areas. Cleaning by hand with water is problematic and time-consuming, particularly with strongly adhering contaminants in tight spaces. Cold Jet dry ice cleaning cuts laminator cleaning time from 10 hours to just 4 hours while effectively reaching areas that manual methods can’t address.
Label printing operations deal with accumulated ink, adhesive carry-over, wrap-arounds, and stray labels that build up over years of production. One label printer successfully used dry ice blasting to remove years of ink and adhesive residue from equipment without damaging precision surfaces. This capability allows facilities to quickly clear label jams and reuse components that might otherwise require replacement while reducing dependence on expensive solvents.



To get started with dry ice cleaning for printing equipment, you’ll need the following:

Step 01
Dry Ice Blasting Equipment
A successful cleaning process starts with the right equipment. Cold Jet dry ice blasters are built for reliability and ease of use, handling everything from delicate electronics to heavy adhesive removal. Each machine ships ready for your application with blast and air hoses, an applicator, and a nozzle included.
See how dry ice blasting stacks up against traditional cleaning methods across the criteria that matter most in printing operations.
| Criteria | Dry Ice Blasting Best | Chemical Cleaning | Manual Cleaning | Ultrasonic Cleaning | Laser Cleaning |
|---|---|---|---|---|---|
| Secondary Waste | None – sublimates to gas, no residue | High – spent solvents and wastewater | Moderate – used solvents, rags, scrapers | High – contaminated cleaning bath | Low – vaporized residue needs extraction |
| Speed | Fast – 60–95% less cleaning time | Slow – soak and wipe cycles | Slow – scraping is labor intensive | Slow – batch soak cycles | Slow – point-by-point on components |
| Equipment Damage | None – safe for sensitive components | Possible – residue on components | High – scraping mars surfaces | Low – but size-limited by tank | Possible – heat can alter surfaces |
| Regulatory Compliance | Strong – chemical-free, no solvents | Limited – solvent and disposal rules | Inconsistent – operator dependent | Moderate – chemical bath disposal | Limited – VOC exposure |
| Downtime | Minimal – clean hot and online | High – disassembly and soak time | High – teardown and scrubbing | High – remove parts to submerge | Moderate – setup per surface |
| Environmental Impact | Low – no chemicals, reclaimed CO₂ | High – hazardous chemical disposal | Moderate – solvent and rag waste | Moderate – chemical bath disposal | Moderate – generates VOC & energy intensive |
Cold Jet offers a range of dry ice blasters to match different printing equipment and cleaning requirements. Popular systems for commercial and industrial printing include:

Aero2® PCS® ULTRA
The Aero2 PCS ULTRA is the most versatile machine for printing and packaging applications. This mobile dry ice blaster handles everything from gentle cleaning of delicate sensors and electronic components with MicroParticle dry ice to aggressive removal of heavy adhesive buildup using 3mm dry ice. The Particle Control System allows operators to dial in the exact cleaning intensity for each application.
Aero® 40FP
The Aero 40FP offers greater power to tackle stubborn contaminants like heavy ink buildup, baked-on adhesives, and thick grease on packaging and printing equipment. Its design allows for consistently powerful, pulse-free blasting. Ideal for printing press cleaning and cleaning heavy-duty packaging equipment.

Aero2® PLT® ULTRA
The Aero2 PLT ULTRA combines powerful cleaning performance with straightforward operation. Its robust design handles heavy ink, grease, and adhesive removal while remaining easy for operators to use across multiple shifts. Ideal for commercial printers and packaging operations seeking reliable performance.
See how each Cold Jet blaster stacks up, so you can match the right machine to ink and paper dust buildup on press rollers, gears, and print units.



| Specification | Aero2® PCS® ULTRA | Aero® 40FP | Aero2® PLT® ULTRA |
|---|---|---|---|
| Particle Control | Variable(0.3mm to 3.0mm, 28 sizes) | Standard(3mm) | Standard(3mm) |
| Controls | Digital(7" LCD, Recipes, IoT) | Analog / Standard | Digital(7" LCD, Recipes, IoT) |
| Feeder Technology | Two-Stage + Defrost Cycle | Advanced Radial Feeder | Two-Stage + Defrost Cycle |
| Application Intensity | Versatile(Precision to Aggressive) | Moderate to Aggressive | Highly Aggressive / High Power |
| Automation & Integration Capable | Yes | No | Yes |
| Hopper Capacity | 60 lbs(27 kg) | 40 lbs(18 kg) | 60 lbs(27 kg) |
Adding dry ice blasting to your maintenance program is an investment, and Cold Jet machines deliver real value. Built for consistent performance, our equipment provides faster ROI and greater long-term value than competitors.

Trusted Printing Industry Expertise
Cold Jet has developed deep expertise in the cleaning challenges printing operations face. We work with commercial printers and packaging manufacturers worldwide to develop effective cleaning solutions for their most demanding applications.
Industry Leading Reliability
Cold Jet dry ice blasters are engineered for demanding production environments. Our machines offer superior reliability and longer service life than competitor equipment, ensuring your investment delivers results year after year. Printing operations rely on Cold Jet equipment for consistent performance across multiple shifts and facilities.
Lower Operating Costs
Cold Jet dry ice cleaning equipment maximizes efficiency, using less dry ice, compressed air, and electricity than competitor machines. This efficiency translates directly to lower daily operating costs without sacrificing cleaning quality. Combined with reduced labor time and eliminated chemical purchases, the total cost savings are substantial.
Unmatched Support and Training
Our support team provides expert maintenance services and comprehensive equipment training, ensuring your operators achieve optimal results from day one.
Application-Specific Accessories
Cold Jet offers specialized accessories including applicators, blast hoses, and nozzles optimized for printing and packaging operations. Our team helps you select the right configuration for your specific cleaning requirements.
With over 24,000 machines installed globally, Cold Jet delivers reliable dry ice cleaning solutions for commercial and industrial printing.




Dry ice blasting helps printing operations meet worker-safety, environmental, and print-quality goals without chemicals or secondary waste.
Chemical and Burn Hazard Reduction
Harsh chemical degreasers, toxic solvents, and manual cleaning with wire brushes expose workers to chemical hazards, burns, and repetitive strain.
Dry ice cleaning eliminates chemical degreasers and manual scrubbing, reducing chemical exposure, burn hazards, and repetitive-strain injuries.
Sustainability Commitments
Solvent- and water-based cleaning generate chemical waste and disposal obligations.
Dry ice blasting uses no chemicals or water and leaves no secondary waste stream, supporting sustainability with reclaimed CO₂.
Print Quality
Ink, grease, and dust buildup on press components degrades print quality and increases scrap and rejected runs.
Non-abrasive, in-place cleaning keeps components clean without damage, improving print quality and reducing scrap and rejection rates.
Contact us today to discover how our dry ice cleaning machines can enhance your process.