
Summary
Cold Jet dry ice blasting prepares surfaces for painting and coating without water, chemicals, or abrasion. The non-aqueous process removes mold release agents, oils, and residues that block adhesion—leaving a clean, activated, immediately paint-ready surface with no drying time, no anchor profile, and no residue to cause fish eyes or peeling.
How is dry ice blasting used in surface preparation?
Dry ice blasting is a non-aqueous, non-abrasive surface preparation and degreasing method used to prepare parts for painting and coating. Solid CO₂ sublimates to gas on impact, removing mold release agents, oils, dust, fingerprints, and manufacturing residues that cause adhesion failures like fish eyes, blistering, and peeling. Because it is non-aqueous, it eliminates drying time, ovens, and water reclamation, so parts move straight to the paint booth. Because it is non-abrasive, it removes contaminants without etching or creating an anchor profile, preserving surface texture and geometry for consistent coating thickness. This makes it ideal for plastics, whose low surface energy and mold-release agents create invisible bonding barriers, as well as automotive, electronics, medical, and aerospace parts. Dry ice leaves no media, chemicals, or moisture, and can meet SSPC-SP 1 solvent-cleaning standards. Cold Jet has more than 24,000 machines installed globally.

Paint-Ready Surfaces Without Water or Residue
Coating adhesion failures such as peeling, fish eyes, and blistering trace back to inadequate cleanliness or invisible mold-release agents, especially on low-surface-energy plastics. Traditional prep struggles: aqueous washers and ultrasonic tanks need drying ovens that slow production cycles, solvent wiping leaves bonding-blocking residues and relies on harsh chemicals, and manual prep is inconsistent, leading to defects and poor coating uniformity. These methods also create waste streams that drive up operational costs.
Cold Jet dry ice blasting is non-aqueous and non-abrasive. It removes release agents, oils, and residues, leaving a clean, activated surface that bonds properly—without etching or an anchor profile. Because it adds no water, parts move straight to the paint booth with no drying time or moisture to compromise adhesion.
Superior
Coating Adhesion
Less
Paint Defects
Automated
Paint-Line Ready
Zero
Secondary Waste
What are the Benefits of Dry Ice Blasting for Surface Preparation?
Dry ice blasting provides superior contaminant removal and immediate paint-ready surfaces
Dry ice blasting eliminates water and drying time while providing thorough contaminant removal in coating and paint surface preparation applications. Dry ice sublimates upon contact, leaving no residual media, chemicals, or moisture that could interfere with coating adhesion. Surfaces are ready for immediate painting or coating, significantly speeding up production cycles.
Consistency is the other advantage over conventional prep. Where spray washers, ultrasonic tanks, and hand wiping produce variable results from part to part, dry ice blasting delivers a repeatable, uniform clean that supports proper paint bonding and coating quality on every cycle.
Stronger, Longer-Lasting Coating Bonds
Dry ice blasting effectively removes all problematic contaminants including mold release agents, lubricants, microscopic dust and particulate, fingerprints and skin oils, and production residues. The surface preparation and degreasing process creates a clean surface that allows paints and coatings to directly bond with the substrate, preventing issues like fish eyes, blistering, and premature coating failure. The dry ice blasting surface prep tool provides greater longevity for coating bond strength compared to other paint surface preparation methods.
Non-Aqueous Surface Prep
Dry ice blasting is a dry surface preparation method that provides immediate paint-ready surfaces. This eliminates the need for costly drying ovens and water reclamation systems. Parts can move from cleaning to the paint booth with ease, significantly reducing cycle times and increasing production.
No Secondary Waste or Residue
Dry ice sublimates into gas upon impact. No cleaning media, chemicals, or moisture remains on parts. This eliminates post-cleaning processes, reduces disposal costs, and ensures no interference with coating adhesion.
Non-Abrasive Surface Preparation
Dry ice blasting is a non-abrasive surface preparation method that does not leave an anchor profile. It thoroughly removes surface contaminants and preserves the integrity of plastic parts and delicate surfaces. The coating surface preparation and paint surface preparation method maintains original surface texture and geometry, ensuring consistent coating thickness.
What Surface Preparation Applications Benefit from Dry Ice Blasting?
Dry ice blast cleaning for plastic paint preparation, coating surface preparation, and degreasing helps manufacturers achieve superior coating performance across multiple industries. Dry Ice blasting is capable of performing to SSPC-SP-1 (Solvent Cleaning) and SSPC-SP-7/NACE 4 (Brush-Off Blast Cleaning) in coating preparation and prepping plastic for painting.
- Automotive parts
- Aerospace composite parts
- Electronic enclosures and housings
- Appliance panels
- Medical device components
- Rubber molded parts
Dry Ice Cleaning Provides Superior Non-Aqueous Surface Prep of Plastic Parts
Dry ice blasting is a water-free and non-abrasive solution that completely removes contaminants from plastic parts.
Surface prep without water or residues
By eliminating water, dry ice blasting allows for immediate painting or coating of plastic parts, without drying time. This significantly speeds up the production process. Dry ice blasting surface prep and degreasing removes the need for costly drying ovens and water reclamation systems in paint surface preparation and coating surface preparation applications.
Optimal surfaces for paint and coating adhesion
Dry ice blasters effectively remove problematic contaminants from the production process, such as mold release agents, oils, dust, and other manufacturing residues. No water, chemicals, or secondary media will be left on the part from the cleaning process. Dry ice creates a truly clean and activated surface on plastic parts, ensuring that paints and coatings bond properly without issues like peeling or bubbling.
Protect surface finish of part
Dry ice cleaning is non-abrasive, ensuring delicate plastic surfaces are cleaned without etching, scratching, or altering the part’s geometry or finish. This is crucial for preserving the aesthetic quality and dimensional integrity of plastic components when prepping plastic for painting.

Dry Ice Cleaning is Used for Surface Preparation in a Variety of Industries
Cold Jet dry ice cleaning machines are designed for easy integration into existing automated production lines. The surface prep process is effective at cleaning plastic parts in automated paint lines, coating lines, and production line systems in a variety of industries:
How Dry Ice Blasting
Compares to Alternatives
See how dry ice blasting stacks up against traditional surface preparation methods across the criteria that matter most in coating and paint prep.
| Criteria | Dry Ice Blasting best | Abrasive Blasting | Aqueous Cleaning | Chemical Cleaning | Ultrasonic Cleaning |
|---|---|---|---|---|---|
| Secondary Waste | None – sublimates to gas, no residue | High – spent media and dust | High – wastewater to reclaim | High – spent solvents and residue | High – contaminated bath and rinse |
| Speed | Fast – immediate paint-ready, no drying | Slow – masking and cleanup | Slow – wash plus drying time | Slow – wipe, rinse, dry | Slow – batch soak plus drying |
| Surface Damage | None – non-abrasive, preserves surface | High – etches and alters geometry | Low – but moisture can remain | Possible – residue and etching | Low – but size-limited by tank |
| Regulatory Compliance | Strong – meets SSPC-SP 1, no chemicals | Limited – dust and containment | Limited – wastewater discharge rules | Limited – VOC and solvent disposal | Moderate – chemical bath disposal |
| Downtime | Minimal – inline, no drying | High – masking and cleanup | High – drying ovens required | High – dwell and dry time | High – soak then dry |
| Environmental Impact | Low – recycled CO₂, no waste | High – abrasive dust and disposal | High – water use and wastewater | High – VOCs and hazardous disposal | Moderate – chemical bath disposal |
What Do Manufacturers Need for Dry Ice Surface Preparation?
A complete dry ice surface preparation system requires the following essential equipment:

Step 01
Dry Ice Blasting Machine
Surface preparation with dry ice blasting requires a reliable and easy to use dry ice blasting system. Cold Jet provides a diverse range of systems, including models with features like our patented Particle Control System (PCS®). The PCS enables you to fine-tune blasting parameters to precisely fit your application. All dry ice blasters come complete with a blast and air hose, an applicator, and a nozzle that is best suited for your surface prep application.
- 01. Dry Ice Blasting Machine — Surface preparation with dry ice blasting requires a reliable and easy to use dry ice blasting system. Cold Jet provides a diverse range of systems, including models with features like our patented Particle Control System (PCS®). The PCS enables you to fine-tune blasting parameters to precisely fit your application. All dry ice blasters come complete with a blast and air hose, an applicator, and a nozzle that is best suited for your surface prep application.
- 02. Compressed Air — Compressed air can be supplied from your facility’s existing filtered air system. Cold Jet dry ice blasters typically need 100 cfm (2.8 m³/min) at 80 psi (5.5 bar) to operate effectively.
- 03. Supply of Dry Ice — We can help you identify a dry ice supplier and recommend the amount you should order based on your needs. Once identified, you can establish a delivery schedule that aligns with your production schedules.
- 04. Operator and Machine Training — Comprehensive training is provided on safe and effective operation, including proper techniques for plastic paint preparation and safety protocols. Cold Jet offers a training course that teaches your team how to use the machine safely and correctly.
- 05. Personal Protective Equipment (PPE) — Staff should have appropriate safety gear while using the dry ice surface prep tool, including gloves, hearing protection, and eye protection.
- 06. Automated Surface Preparation (Optional) — Surface prep processes using dry ice blasting are commonly automated — especially for preparing plastic for paint. Fully automated dry ice blasting systems combine a dry ice maker, dry ice blaster, and robotic arm in one system for consistent, repeatable results.
What Is the Best Dry Ice Blasting Machine
for Surface Preparation?
Cold Jet offers a comprehensive range of dry ice blasting machines for surface preparation applications. Our user-friendly machines are ideal for preparing surfaces before painting and coating operations. Cold Jet dry ice blasting machines are capable of achieving a surface condition that meets the SSPC-SP 1 Solvent Cleaning standards.

Aero2® PCS® ULTRA
The Aero2 PCS ULTRA is a versatile surface prep tool for a variety of surface preparation applications, from extremely gentle cleaning with MicroParticle dry ice on delicate plastic surfaces to aggressive cleaning of larger components with 3 mm dry ice granules. The PCS ULTRA can be integrated into your production line for automated surface prep.

i3 MicroClean® 2
The i3 MicroClean 2 is the next generation of precision surface preparation. It offers better efficiency and intuitive controls in a lightweight and compact system. Easily control cleaning aggression to lock in the ideal parameters for coating surface preparation and preparing plastic for paint. The MicroClean 2 can also be integrated into paint lines or production lines for automated surface preparation.

i3 MicroClean®
The i3 MicroClean is an efficient, lightweight machine that is effective for surface prep applications across multiple industries. Integrate it into your process as an automated surface prep solution.
Which Dry Ice Blaster Fits Your Surface Preparation Work?
Compare the Cold Jet blasters suited to surface prep, so you can match cleaning intensity to the substrates and contaminants you need to remove before painting, coating, or bonding.
| Specifications | Aero2® PCS® ULTRA | i3 MicroClean® 2 | i3 MicroClean® |
|---|---|---|---|
| Particle Control | Variable(0.3mm to 3.0mm, 28 sizes) | Microparticles(Shaved) | Microparticles(Shaved) |
| Controls | Digital(7" LCD, Recipes, IoT) | Digital(7" LCD, Recipes, IoT) | Analog / Standard |
| Feeder Technology | Two-Stage + Defrost Cycle | Radial Feeder | Radial Feeder |
| Application Intensity | Versatile(Precision to Aggressive) | Delicate / Precision | Delicate / Precision |
| Automation & Integration Capable | Yes | Yes | No |
| Hopper Capacity | 60 lbs(27 kg) | 25 lbs(11 kg) | 20 lbs(9 kg) |
Why Choose Cold Jet for Surface Preparation with Dry Ice Blasting?
If you’re upgrading your surface prep process before painting or coating, investing in a Cold Jet dry ice blaster enhances your operation’s efficiency while ensuring optimal coating adhesion. When evaluating this capital investment, consider both the return on investment (ROI) and operational benefits. Cold Jet machines deliver faster ROI and greater value.

Proven Surface Preparation Solution
Decades of field-tested performance in various industries demonstrate Cold Jet’s ability to provide superior results for prepping plastic for painting and coating preparation.
Trusted Surface Prep Partner
Cold Jet has more than 24,000 installed systems globally, including in paint shops, coating lines, and automated production lines from small specialty manufacturers to leading manufacturing facilities.
Superior Reliability
Cold Jet equipment is engineered for demanding industrial environments, delivering years of dependable operation that keeps your surface preparation process running smoothly with minimal downtime. Cold Jet dry ice blasters have significantly longer machine life than competitors, ensuring consistent performance over time.
Comprehensive Support and Training
Our field service specialists work closely with your team to provide hands-on training and ensure peak system performance of your dry ice surface preparation equipment. Should any unforeseen issues arise, rest assured they will be addressed swiftly and effectively to minimize any impact on your operations.
Lower Operating Costs
Our dry ice blasters use significantly less dry ice, compressed air, and electricity than competitor machines. This helps you control operational costs in your surface preparation and coating processes.
Application Specific Accessories
Our wide range of accessories, including applicators, blast hoses, and application-specific nozzles help you ensure your dry ice surface preparation equipment is perfectly configured for your unique surface preparation and coating requirements.
Surface preparation customers around the world rely on Cold Jet
With a global install base of 24,000+ that consists of companies large and small, Cold Jet delivers valuable dry ice blasting surface preparation equipment.
What Our Customers Say About Us
Contractor Preps Ski Lifts for Painting in Half the Time with Dry Ice
Summary
Nordic Mountain ski resort needed weather-worn chairlift towers stripped of cracked paint before repainting, but mechanical grinders left residue and missed hard-to-reach spots. Contractor High Peaks Chairlift Painting used Cold Jet dry ice blasting instead, cutting prep time in half and extending the repaint cycle to 10-15 years.
Meeting Coating Standards Safely
Dry ice blasting helps manufacturers meet surface-cleanliness standards and quality and environmental goals without chemicals or water.
Surface-Cleanliness Standards
Coating specifications require verified surface cleanliness—removal of oils, residues, and contaminants—before paint or coating is applied.
Dry ice blasting achieves surface conditions meeting SSPC-SP 1 (Solvent Cleaning) and SSPC-SP 7/NACE 4 (Brush-Off Blast Cleaning), delivering documented, repeatable cleanliness for coating.
Coating Quality & Adhesion
Residues, moisture, and inconsistent prep cause fish eyes, blistering, peeling, and premature coating failure that drive rework and scrap.
Residue-free, non-abrasive cleaning leaves an activated surface for strong, uniform adhesion, reducing coating defects and improving first-pass yield.
Environmental & Worker Safety
Aqueous and solvent prep generate wastewater, chemical waste, and VOC exposure that require handling, treatment, and disposal.
Chemical- and water-free dry ice blasting eliminates wastewater, solvents, and VOCs, reducing worker exposure and disposal costs with recycled CO₂.










