
Aero 40FP
1 performance applicator, choice of 1 performance nozzle, blast hose, air hose

Choosing a dry ice blaster comes down to three variables. First, substrate and contaminant. Delicate electronics and sensitive tooling need a machine capable of blasting with dry ice microparticles as small as 0.3mm. Painted steel, weld cells, and foundry tooling with difficult-to-remove contamination, such as asphalt and strong adhesives, take full 3mm pellets at full pressure. Second, throughput. Feed rate and hopper capacity set how long you can blast before refilling: a 13 lb (6 kg) hopper suits short intermittent jobs, while an 80 lb (36 kg) hopper supports continuous production shifts. Third, compressed air, which is the constraint most buyers discover last. Every machine has a minimum CFM at a given pressure, and a blaster running on insufficient air underperforms regardless of its rating. Confirm your compressor before selecting a model. Where a single machine must cover both delicate and aggressive work, Cold Jet's patented Particle Control System (PCS) shaves pellets to any size in that range, replacing the need for two machines.
Last updated
12 models

1 performance applicator, choice of 1 performance nozzle, blast hose, air hose

1 performance applicator, choice of 1 performance nozzle, blast hose, air hose

1 precision applicator, choice of 2 precision nozzles, blast hose, air hose

1 performance applicator, choice of 1 performance nozzle, blast hose, air hose

The Cold Jet COMBI® PCS® 110 is an integrated system that produces and blasts its own dry ice in one machine. Fed by an on-site liquid CO₂ tank, it makes up to 242 lb (110 kg) of dry ice per hour, adjusts particle size from 0.3 to 3.0 mm, and supports up to two blast points. Built for extended, operator-free cleaning, surface preparation, and part finishing.

The Cold Jet COMBI® PCS® 110 DUAL is an integrated system with two blasting outlets that produces and blasts its own dry ice in one machine. Fed by an on-site liquid CO₂ tank, it makes up to 242 lb (110 kg) of dry ice per hour in total, adjusts particle size from 0.3 to 3.0 mm, and supports up to four blast points. Built for operator-free production across multiple stations.

The Cold Jet COMBI® PCS® 320 DUAL is an integrated system with two blasting outlets that produces and blasts its own dry ice in one machine. Fed by an on-site liquid CO₂ tank, it makes up to 705 lb (320 kg) of dry ice per hour, blasts up to 485 lb (220 kg) per hour across up to four blast points, and adjusts particle size from 0.3 to 3.0 mm. Built for high-volume, extended-hour operations with no operator needed.

i3 MicroClean blaster, precision applicator with lights, choice of 2 precision nozzles, 12 ft blast hose, 25 ft air hose, cart with ice cooler

i3 MicroClean 2 blaster, precision applicator, choice of 2 precision nozzles, 12 ft blast hose, 25 ft air hose, storage cart

1 precision applicator, choice of 1 precision nozzle, blast hose, air hose

Elite 20 blaster, IceGun with light, choice of nozzle, 24 ft blasting hose, 32 ft air supply hose

The Cold Jet TEC™ 1200 turns your Aero₂® ULTRA blaster (PCS® or PLT®) or legacy Aero₂® PCS® 60 blaster into a thermally enhanced dry ice cleaning system. Electrically heated air of up to 1,200°F increases air velocity by up to 70% and nearly triples particle impact force. That lets it strip paints, epoxies, and tough adhesives beyond the reach of standard dry ice blasting, with no abrasive media.
Contact us today to discover how our dry ice cleaning machines can enhance your process.