Patented MicroParticle Technology
Proprietary technology shaves block or pellet dry ice into ultra-fine MicroParticles for precise, delicate cleaning. Uses less air and produces less noise.

The Cold Jet i3 MicroClean® is a precision dry ice blasting system built for cleaning delicate surfaces, complex cavities, and tight crevices that standard blasters can't address. Featuring Cold Jet's patented shaved MicroParticle technology, it delivers controlled blasting at 20–140 psi with as little as 12 CFM of compressed air. Table-top footprint with a transport cart included.
Select Package
Documents
Not every cleaning challenge calls for more power — some call for more control. The i3 MicroClean is purpose-built for applications where substrate integrity, geometric complexity, and contamination sensitivity make conventional blasting unsuitable.
Compliant with EU Machinery Directive (CE) and UL Design Standards.
Every design element of the i3 MicroClean is optimized for precision, accessibility, and ease of use in sensitive environments.

Interactive 3D
Proprietary technology shaves block or pellet dry ice into ultra-fine MicroParticles for precise, delicate cleaning. Uses less air and produces less noise.
Standard configuration runs on block dry ice for MicroParticle shaving. The optional DX upgrade adds compatibility with pellets.
Operates at as little as 12 CFM — Cold Jet's lowest air requirement — without compromising cleaning quality.
Blast pressure adjusts from 20 to 140 psi. Dial in the right cleaning power for each substrate.
Compact enough to sit on a workbench or cart. The included mobility cart makes transport between stations and work cells easy.
Lower pressures and smaller particles produce dramatically less noise than conventional blasters. Enables operation in noise-sensitive facilities.
Accessible components behind removable panels make maintenance faster and less disruptive.
Supplied grounding cable bonds the target surface to reduce electrostatic discharge during cleaning.
Dry ice blasting eliminates the trade-offs of conventional cleaning — delivering precision results with no chemicals, no water, no abrasion, and no waste.
Dry ice is a very soft media (1.5–2 on the Mohs Scale of Hardness) and can clean most surfaces without etching, profiling, or changing surface dimensions.
Dry ice is a food grade media approved for use in FDA and USDA inspected facilities. It is colorless, tasteless, odorless, and non-toxic.
Dry ice is non-conductive and will not cause corrosion or rusting of surfaces. It also allows for electrical equipment to be safely cleaned.
ProcessNo water, no moisture. Eliminates drying time and removes the risk of corrosion and damage to sensitive mechanical or electrical assemblies.
Dry ice sublimates completely on contact. Only the removed contaminant remains for disposal, which dramatically reduces cleanup time and waste handling costs.
UptimeClean equipment in place to significantly reduce maintenance windows and maximize production availability.
Eliminates chemical cleaning solvents — reducing exposure risk for workers and removing the environmental burden of hazardous waste handling and disposal.
Dry ice is made from recycled CO₂ collected from other industrial processes. No new greenhouse gases are produced or added to the atmosphere.
From cleanrooms to precision mold shops, the i3 MicroClean delivers where conventional blasting can't — validated across a wide range of detail-critical industries and applications:
Dry Ice Cleaning Equipment for Plastic & Rubber Molds

Dry Ice Blasting Machines for Composite Tool Cleaning
Dry Ice Blasting Equipment for Adhesive Removal
Dry Ice Blasting Equipment for Deburring and Deflashing
Dry Ice Blasting Equipment for Electronic Device Refurbishment
Dry Ice Blasting Machines for Surface Preparation
Dry ice blasting combines three primary factors to remove contaminants: Kinetic Energy, Thermodynamic Shock, and Thermal-Kinetic Effect.
Step 01
SupersonicDry Ice Velocity
Kinetic Energy
Dry ice is accelerated by compressed air through specially designed nozzles at supersonic speeds. The impact creates a kinetic energy effect that breaks the initial bond between contaminant and substrate.
Dry ice blasting leaves zero secondary waste — the CO₂ sublimates completely, leaving only the removed contaminant for disposal.
The i3 MicroClean requires three inputs to operate: compressed air, a standard electrical connection, and block or pellet dry ice.
Plastics Processor Reduces Mold Cleaning Time to Under 10 Minutes
Summary
Marquardt runs 100 injection molding machines producing 3,000 different products, and manual mold cleaning required full disassembly, costing four hours of downtime per cycle. Installing Cold Jet's i3 MicroClean-S4 system let operators clean hot molds in-press without disassembly, cutting cleaning time to just 5–10 minutes and improving consistency.
Compare the full Cold Jet lineup on the six factors that set each system apart. The system you’re viewing is highlighted; select any other row to learn more.
| Model | Particle Control | Controls | Feeder Technology | Application Difficulty | Automation & Integration Capable | Dry Ice Capacity |
|---|---|---|---|---|---|---|
i3 MicroCleanYou’re viewing | Microparticles (Shaved) | Analog / Standard | Radial Feeder | Delicate / Precision | No | 20 lb |
Microparticles (Shaved) | Digital (7" LCD, Recipes, IoT) | Radial Feeder | Delicate / Precision | Yes | 25 lb | |
Variable (0.3mm to 3.0mm, 28 sizes) | Digital (7" LCD, Recipes, IoT) | Two-Stage + Defrost Cycle | Delicate to Aggressive | Yes | 60 lb | |
Standard (3mm) | Digital (7" LCD, Recipes, IoT) | Two-Stage + Defrost Cycle | Highly Aggressive / High Power | Yes | 60 lb | |
Standard (3mm) | Analog / Standard | Advanced Radial Feeder | Moderate to Aggressive | No | 40 lb | |
Standard (3mm) | Analog / Standard | Advanced Radial Feeder | Moderate to Aggressive | No | 80 lb | |
Standard (3mm) | Analog / Standard | Horizontal Disk Dosing | Basic | No | 20 lb | |
Standard (3mm) | Analog / Standard | Horizontal Disk Dosing | Moderate | No | 44 lb | |
Host-Dependent (PCS or PLT) | Digital (12" LCD Touch Screen) | Dual-Hose & Patented Cone Nozzle | Most Aggressive (Paint/Coating Stripping) | Yes |
All specs extracted from the official Cold Jet data sheet. Use the toggle to switch between Imperial and Metric units.
| Specification | Imperial |
|---|---|
| Dimensions (L × W × H) | 22 × 16 × 21 in |
| Weight | 130 lb |
| Dry Ice Capacity | 20 lb |
| Variable Feed Rate | 0–1.2 lb/min |
| Blast Pressure Range | 20–140 psi |
Local-to-you service network
With strategically placed technicians and a support team available 24/7, 365 days a year, Cold Jet is always within reach — whether you need technical troubleshooting, parts guidance, or advice on getting the most from your machine.
13-Month / 500-Hour Coverage
Parts protection against manufacturing defects, serviced exclusively by OEM technicians.
Machine documentation, extended warranty coverage, and priority technical support — everything you need to protect your investment and maximize uptime. Available in Connect Care and Connect Enterprise tiers.

Nothing to buy. What you get depends on the machine.
Machine Documentation
Included
No subscription to buy — it ships with the machine.
Extended Warranty, Discounts & Spare Parts Kit
Included
No subscription to buy — it ships with the machine.
Priority Support, Onsite Maintenance & Training
Included
No subscription to buy — it ships with the machine.
The right precision cleaning solution depends on your substrate, contaminant type, and air supply — and Cold Jet's application experts have the knowledge to confirm the i3 MicroClean is the right for you.