10 ft High Cube ISO Container
A rugged, transportable container ships by truck and is lifted by crane — dry ice production wherever you need it.

The Cold Jet Dry Ice Production Hub puts a complete dry ice plant inside a 10 ft High Cube ISO container. Choose a PR120H or PR350H pelletizer for up to 265 lb (120 kg) or 772 lb (350 kg) of pellets or nuggets per hour — with ventilation, heating, and CO₂ safety monitoring built in.
Select Package
Documents
The Dry Ice Production Hub delivers fresh, high-quality dry ice where there is no production room to build — remote sites, temporary operations, or locations with space constraints. Everything arrives in one transportable container: a machine room with the pelletizer and a filling room where operators program the amount of dry ice, position a tote, and press a button. Connect power, liquid CO₂, and instrument air, and you are ready to produce.
Compliant with the EU Machinery Directive (CE) and UL Design Standards.
Every Hub arrives as a complete, safety-equipped dry ice plant — ready to connect, easy to operate, and built to move.

Interactive 3D
A rugged, transportable container ships by truck and is lifted by crane — dry ice production wherever you need it.
The pelletizer runs in its own machine room while operators fill totes in a separate filling room.
Size the Hub to your demand with up to 120 kg/hr or 350 kg/hr of high-density pellets or nuggets.
Program the amount of dry ice per tote on the HMI, position the tote under the chute, and press one button.
Production stops automatically when the dry ice tote is full, so nothing overflows or goes to waste.
A built-in three-level alarm warns operators at 1%, 2%, and 3% CO₂ concentration.
Two turbine exhaust fans and an AC unit keep CO₂ vented and room temperature under control.
The container encloses the pelletizer, keeping noise below 85 dB(A) outside the machine room.
Real-time machine data and remote support over Ethernet or a mobile 3G/4G connection — ideal for remote sites.
Connect power, liquid CO₂, and instrument air or CO₂ vapor — with quick-connect CO₂ supply piping.
The PR120H and PR350H use sub-cooling technology for 12–14% better liquid CO₂ conversion than other systems.
Cold Jet can adapt the Hub to your site, climate, and production requirements.
Specs from the official Cold Jet spec sheet, user manual, and pre-installation guide. Use the toggle to switch between Imperial and Metric units.
| Specification | Imperial |
|---|---|
| Dimensions (L × W × H) | 117.8 × 96 × 113.8 in |
| Container weight (without pelletizer) | 6614 lb |
| Power Supply | 3 × 400 V AC (50 Hz) |
| Maximum Power Consumption | 11 kW |
| Power supply cable protection | 35 A |
Built for maintaining critical temperatures where dry ice deliveries are slow, unreliable, or unavailable.

Seafood exporters use dry ice to replace most or all of the water ice in an export box. Dosed on fillets or on a reduced layer of flake ice, it supercools the pack, holds temperature for up to 144 hours, removes melt water, and cuts about 4 kg from each fresh fillet box.
Meat and poultry processors use dry ice pellets to rapidly chill product on trim lines and in mixers, grinders, and blenders, where friction adds heat. Dry ice sublimates instead of melting, so it adds no water, drip loss, or leachate, and onsite production ensures fresh, high-density ice is always ready for every shift.

Airline caterers use dry ice to keep in-flight meals, beverages, and frozen desserts cold from the flight kitchen to final service, with no electricity and no melt water. Producing pellets, nuggets, or slices onsite removes delivery windows, minimum orders, and storage losses, so caterers make exactly what each day’s changing flight schedule requires.
The Cold Jet Dry Ice Production Hub can be tailored with four options. Add pellet and nugget extruder plates (3, 6, 10, and 16 mm) for its PR120H or PR350H pelletizer, and a 2 in copper CO₂ recovery line to connect a Cold Jet RE-CO2 160 or RE-CO2 320V2. Container layout, climate, and production options can be custom designed, and a maintenance plan schedules safety and preventive inspections.
Pellet and nugget die plates (3, 6, 10, 16 mm) to match your dry ice production needs
PR120H / PR350H2 in copper recovery line with ball-style check valve, for connecting a Cold Jet RE-CO2 recovery system
HubContainer layout, climate, and production options adapted on request
HubSchedule a safety and preventative maintenance inspection
Hub* Custom designs are available on request. Contact Cold Jet for pricing.
Real-time machine data and remote technical support — even at remote sites, over Ethernet or a mobile 3G/4G connection.
Nothing to buy. What you get depends on the machine.
Real-Time Data
Included
No subscription to buy — it ships with the machine.
Remote Diagnostics
Included
No subscription to buy — it ships with the machine.
3G/4G Connection
Included
No subscription to buy — it ships with the machine.
A Cold Jet technician handles final commissioning, start-up, and training on site. After that, more than 70 people in Cold Jet's customer service organization and full spare parts inventory in every region support you 24/7, 365 days a year.
Extended warranty programs and complete service agreement offerings are available for the Dry Ice Production Hub.
Tell us where you need dry ice and how much. Our team will size the Hub, plan your liquid CO₂ supply, and handle commissioning and training on site.