Dry ice blasting removing mold spores resulting from water damage
Industries

Dry Ice Blasting Equipment for Professional Restoration & Remediation

Cold Jet's dry ice cleaning machines deliver superior remediation results for restoration contractors, mold remediation specialists, and disaster recovery professionals. By replacing labor-intensive sanding, moisture-adding chemical treatments, and waste-generating soda blasting with a faster, completely dry process, contractors remove mold, soot, and char from hard-to-reach areas, eliminate odor at the source, and cut project time and labor.

Up to 70%

Less Project Time

100%

Contaminant Removal

2–4 Projects

To ROI

Contact Us
Overview

Summary

Cold Jet dry ice blasting helps restoration contractors remove fire, smoke, and mold damage without moisture, chemicals, or secondary waste. The completely dry, non-abrasive process reaches tight spaces to remove 100% of soot, char, and mold spores in a single pass – cutting remediation time up to 70% and reaching ROI in as few as 2–4 projects.

Quick Answer

What is dry ice blasting used for in restoration and remediation?

Dry ice blasting is a completely dry, non-abrasive, non-toxic cleaning method used by restoration contractors for fire and smoke remediation and mold remediation. Solid CO₂ sublimates to gas on impact, removing 100% of smoke soot, char, and mold spores—including hard-to-reach areas around joists, nails, wiring, and HVAC—in a single pass. Because it adds no moisture, it won't trigger future mold growth as chemical treatments can, and because it removes odor-causing carbon deposits at the source, it eliminates the need for sealants and deodorizers. Documented users consistently pass Post Remediation Verification (PRV) clearance tests without biocides or encapsulants. Cleaning rates reach 10 sq. ft. per minute, cutting remediation time up to 70% with far less labor and no secondary waste—soda blasting, by contrast, requires cleanup equal to 1.5x the blast time. Contractors typically reach ROI in 2–4 projects. Cold Jet has more than 24,000 machines installed globally.

dry ice blasting removing soot and smoke damage
Exploring dry ice production for your process?Get expert guidance
Challenge

Complete Removal Without Moisture or Waste

Fire, smoke, and mold damage is slow and costly to remediate. Sanding and wire brushing can't reach around joists, nails, and wiring, leaving spores that need follow-up biocides and encapsulants. Chemical treatments add moisture that triggers new mold, and soda blasting adds media and cleanup that takes 1.5x the blast time.

Cold Jet dry ice blasting is completely dry, non-abrasive, and non-toxic. It removes 100% of soot, char, and spores in a single pass, reaching tight spaces and removing odor-causing carbon. With no moisture or secondary waste, contractors cut project time up to 70%, skip biocides and encapsulants, and prevent regrowth.

Less Labor

Needed Per Project

100%

Spore & Soot Removal

Completely Dry

No Moisture Added

Quick

ROI

Benefits

Benefits of Dry Ice Cleaning for Restoration & Remediation

Dry ice blasting machines reduce project times, eliminate secondary waste, and deliver superior cleaning results

Cold Jet dry ice blasting consistently improves restoration contractors’ operational efficiency and project profitability. Whether you are remediating fire damage, removing mold from attics and crawl spaces, or restoring water-damaged structures, dry ice blasting machines enable you to work faster and achieve better results. The process completely removes contaminants and odor-causing residue, while eliminating biocide and encapsulant application and secondary waste cleanup that adds days to remediation projects.

Reduce DowntimeLess Time and Labor

Significantly Reduced Project Time and Labor

Dry ice blasting reduces remediation time by up to 70% compared to traditional methods. A 2,000 sq. ft. attic mold remediation project that requires 10 days and a crew of 10 workers using traditional sanding methods can be completed in 2 days with just 2 operators using dry ice blasting. By eliminating labor-intensive hand scraping, biocide and encapsulant application, and time-consuming secondary waste cleanup, contractors complete more projects per month and increase revenue capacity.

Secondary WasteFaster Projects

No Media Cleanup After Blasting

Dry ice sublimates on impact and does not produce secondary waste streams. Unlike soda blasting, which requires cleanup time equal to 1.5x the blast time, dry ice cleaning eliminates the need for blasting media collection and disposal. This significantly reduces encapsulation costs, overall project duration, and the environmental risks associated with soda blasting.

A Better Clean100% Removal

Complete Contaminant Removal

Cold Jet dry ice blasting achieves 100% removal of smoke soot, char, and mold spores. The process removes odor-causing carbon deposits rather than masking them with chemicals or sealants. By completely removing mold spores, dry ice cleaning eliminates the risk of mold regrowth.

ChemicalsNo Chemicals

Eliminate Biocide and Sealant Application

Traditional mold remediation methods cannot achieve complete spore removal, requiring follow-up biocide applications to kill remaining mold and sealants to encapsulate residual staining. Dry ice blasting removes 100% of mold spores and staining in a single pass, eliminating the need for chemical biocide treatments and reducing or eliminating encapsulant requirements. This saves material costs and shortens project timelines.

Operator Safe / Non ToxicSafety

Safe for Operators and Environments

Dry ice is non-toxic, non-corrosive, and non-conductive. The process eliminates exposure to harsh chemicals and can be used safely around electrical wiring and components. Operators experience less physical strain compared to hand sanding and brushing, while neighboring businesses or households are not affected by chemical fumes or abrasive debris.

Applications

Key Restoration & Remediation Applications for Dry Ice Blasting

Cold Jet dry ice blasting machines help restoration contractors reduce project time by up to 70%, increase profit per project, and deliver superior results. Dry ice cleaning is an effective solution for a variety of restoration and remediation applications, including fire and smoke remediation and mold remediation.

Validated For
  • Fire Remediation
  • Smoke Remediation
  • Mold Remediation

Fire and Smoke Remediation

Dry ice blasting enables restoration contractors to clean fire-damaged structures in a fraction of the time while achieving complete removal of char, soot, and odor-causing residue.

Faster Cleaning Process

Dry ice blasting cleans fire-damaged surfaces at rates as fast as 10 sq. ft. per minute—significantly faster than hand wiping and sanding. The process eliminates the secondary cleanup time required by traditional methods, which often takes days. By comparison, soda blasting requires debris collection and disposal that often takes 1.5x the blast time. Dry ice sublimates on contact, leaving only the removed contaminant to manage.

Reduce Labor Costs

Fire restoration projects can reduce labor requirements by 50-70% with dry ice blasting while significantly compressing project timelines. The labor savings translate directly to increased profitability per project. Contractors can achieve ROI on their dry ice blasting equipment in as few as 2-4 fire restoration projects, with single jobs generating up to $20,000 in labor savings on commercial projects. Additionally, dry ice blasting is less physically demanding than hand wiping and sanding, and the cooling effect of dry ice provides relief for operators working in hot environments like attics and crawl spaces.

Eliminate Odor without Replacing Roof

Traditional fire remediation relies on coatings and deodorizers to mask the smell of smoke damage. These treatments cover but do not eliminate the odor-causing carbon deposits embedded in wood grain and porous surfaces. Oftentimes, insurance providers require the replacement of the smoke-damaged roof. Dry ice blasting removes 100% of the charred material and carbon residue, eliminating the need for roof replacement.

Removing soot from a metal ceiling with dry ice cleaning
Removing soot from a metal ceiling with dry ice cleaning
Dry ice blasting removing smoke and soot from fire-damaged wood
Dry ice blasting removing smoke and soot from fire-damaged wood
Removing fire damage and soot from hardwood floors with dry ice cleaning
Removing fire damage and soot from hardwood floors with dry ice cleaning

Mold Remediation

Dry ice blasting removes 100% of mold spores from wood surfaces in significantly less time, often eliminating biocide and encapsulation steps.

Complete Removal of Mold Spores

Traditional mold remediation methods—sanding and wire brushing—cannot access hard to reach areas, such as between boards and joists, around wiring and HVAC components, and around nails. These methods cannot fully remove mold spores, requiring biocide and encapsulant after cleaning. Cold Jet dry ice blasting achieves complete mold spore removal, which eliminates the need for biocide and encapsulant application. Documented users of dry ice blasting for mold remediation consistently pass Post Remediation Verification (PRV) clearance tests.

Dramatically Reduce Project Time and Labor

Eliminating biocide and encapsulant application significantly reduces overall project time. A 2,500 sq. ft. mold remediation project drops from 500 labor hours to 50 hours with dry ice blasting. Typical mold remediation projects require up to 10 workers with traditional methods, while dry ice blasting typically requires only 2 operators.

Clean in Confined Spaces Safely and Thoroughly

Attics, crawl spaces, and areas behind walls present significant challenges for mold remediation. Traditional methods require workers to sand or apply chemicals in awkward positions in environments that are often extremely hot. Cold Jet dry ice blasting is more ergonomic, and the cooling effect of dry ice provides welcome relief for operators working in these confined, high-temperature spaces.

Dry ice blasting removing mold spores resulting from water damage
Dry ice blasting removing mold spores resulting from water damage
Basement mold remediation with dry ice cleaning
Basement mold remediation with dry ice cleaning
Removing mold from wood beams with dry ice blasting
Removing mold from wood beams with dry ice blasting
What You Need

What Do Restoration Contractors Need for Dry Ice Blasting?

An effective dry ice blasting operation for remediation and restoration relies on several key components:

Dry Ice Blaster

Step 01

Dry Ice Blasting Machine

A successful restoration operation begins with a reliable and portable dry ice blasting system. Cold Jet provides a comprehensive line of dry ice blasters designed for the demanding conditions of remediation job sites. Systems range from entry-level machines for contractors adding dry ice blasting to their services to blasters for large-scale commercial fire restoration projects. Each system includes blast and air hoses, applicator, and application-specific nozzles.

  • 01. Dry Ice Blasting Machine — A successful restoration operation begins with a reliable and portable dry ice blasting system. Cold Jet provides a comprehensive line of dry ice blasters designed for the demanding conditions of remediation job sites. Systems range from entry-level machines for contractors adding dry ice blasting to their services to blasters for large-scale commercial fire restoration projects. Each system includes blast and air hoses, applicator, and application-specific nozzles.
  • 02. Compressed Air — Dry ice blasting requires a supply of clean, dry compressed air. Many contractors use portable diesel air compressors that can be positioned outside the structure being cleaned. Air treatment ensures dry ice flows consistently without clumping.
  • 03. After Cooler — An after cooler may be useful if you are using a portable diesel compressor as your air source. An after cooler removes most of the moisture from the system and cools the air to temperatures needed for trouble-free cleaning.
  • 04. Dry Ice Supply — A reliable supply of 3mm dry ice pellets is essential for uninterrupted remediation work. Cold Jet can connect you with dry ice suppliers in your region.
  • 05. Operator Training — Proper training ensures operators achieve optimal cleaning results while following safety protocols. Cold Jet provides comprehensive training covering equipment operation, effective cleaning techniques, and safety procedures for remediation projects.
  • 06. Personal Protective Equipment (PPE) — Remediation work requires appropriate safety gear including hearing protection, safety glasses, and work gloves.
Comparison

How Dry Ice Blasting Compares to Alternatives

See how dry ice blasting stacks up against traditional cleaning methods across the criteria that matter most in restoration and remediation.

Criteria
Dry Ice Blasting
Best
Chemical Cleaning
Manual Cleaning
Sand Blasting
Soda Blasting
Secondary Waste
None – sublimates to gas, no residue
Moderate – spent biocides and containers
Moderate – sanding dust and debris
High – spent abrasive media and dust
High – spent soda media to clean up
Speed
Fast – up to 70% less project time
Slow – multiple treatment passes
Slow – hand sanding and brushing
Slow – masking and cleanup add time
Slow – cleanup ~1.5x the blast time
Equipment Damage
None – non-abrasive, preserves wood
Possible – moisture can trigger regrowth
High – sanding gouges and thins wood
High – abrasive, damages surfaces
Low – gentler, but leaves residue
Regulatory Compliance
Strong – passes PRV, no chemicals
Limited – biocide handling and disposal
Inconsistent – may fail PRV clearance
Limited – dust/containment rules
Limited – containment, harms vegetation
Downtime
Minimal – dry, single pass, no cure time
High – dry/cure time between passes
High – slow, multi-day labor
High – containment and cleanup
High – containment and media cleanup
Environmental Impact
Low – no chemicals, reclaimed CO₂
High – biocide and chemical disposal
Moderate – dust and debris
High – media can damage vegetation
High – media can damage vegetation
Comparing dry ice blasting to your current method?Talk to an expert
Machine comparison

How Do These Dry Ice Blasters Compare for Restoration Work?

Side-by-side specs for the Cold Jet blasters restoration contractors rely on, so you can match each machine to fire and smoke damage, mold remediation, and historic surfaces.

Aero2 pcs ultra
Aero2® PCS® ULTRA
Aero2 plt ultra
Aero2® PLT® ULTRA
Aero 40fp
Aero® 40FP
Specification
Aero2® PCS® ULTRA
Aero2® PLT® ULTRA
Aero® 40FP
Particle Control
Variable(0.3mm to 3.0mm, 28 sizes)
Standard(3mm)
Standard(3mm)
Controls
Digital(7" LCD, Recipes, IoT)
Digital(7" LCD, Recipes, IoT)
Analog / Standard
Feeder Technology
Two-Stage + Defrost Cycle
Two-Stage + Defrost Cycle
Advanced Radial Feeder
Application Intensity
Versatile(Precision to Aggressive)
Highly Aggressive / High Power
Moderate to Aggressive
Automation & Integration Capable
Yes
Yes
No
Hopper Capacity
60 lbs(27 kg)
60 lbs(27 kg)
40 lbs(18 kg)
Not sure which blaster fits your project?Get a recommendation
Why Cold Jet

Why Invest in Cold Jet Machines for Restoration & Remediation?

Investing in dry ice blasting equipment is a strategic decision that can transform your restoration business. Cold Jet machines consistently deliver faster ROI and greater operational value than competitors. Consider both the return on investment and the significant competitive advantages dry ice blasting provides.

cold jet dry ice blasters

Restoration Industry Expertise

Cold Jet has worked with restoration and remediation contractors for decades, developing deep knowledge of the specific cleaning challenges and operational demands of fire, smoke, mold, and water damage restoration.

Proven ROI

Restoration contractors typically achieve ROI on their dry ice blasting investment within 2-4 projects. A single fire restoration project can generate $10,000-$20,000 in labor savings compared to traditional methods. Mold remediation contractors report equipment payback in less than 4 jobs based on significant labor cost reductions.

Trusted by Leading Restoration Companies

With more than 24,000 machines installed globally, Cold Jet is the trusted choice for restoration professionals. Companies ranging from national franchise networks to independent contractors rely on Cold Jet equipment for fire restoration, mold remediation, and specialty restoration applications.

Industry-Leading Reliability

Our machines are built to withstand the demanding conditions of remediation job sites. Cold Jet dry ice blasting equipment is more reliable, more durable, and has significantly longer service life than competing machines. This reliability is critical for contractors who depend on equipment availability to meet project deadlines.

Lower Operating Costs

Cold Jet dry ice blasters are engineered for efficiency, consuming less dry ice and less compressed air than other machines on the market. These savings compound across projects, reducing your operating costs while maintaining superior cleaning performance.

Unmatched Support and Training

Our regional service technicians are always accessible. Cold Jet provides expert maintenance services and comprehensive training to ensure your team’s success from day one.

Ready to make the switch?Talk to us
Trusted by

Restoration professionals around the world rely on Cold Jet

With a global installed base of 24,000+ machines, Cold Jet delivers real value to restoration and remediation contractors of all sizes.

  • belfor logo b logo
  • 911Restoration logo
  • PaulDavis PropertyRestorationExperts logo
  • ServiceMaster Restore logo
  • PuroClean logo
  • servpro logo
Compliance

Meeting Remediation Standards Safely

Dry ice blasting helps restoration contractors meet remediation-verification, worker-safety, and environmental standards without chemicals or secondary waste.

PRV Clearance

Remediation Verification

Mold remediation must pass Post Remediation Verification (PRV) clearance testing to confirm contaminants are fully removed.

How We Comply

Dry ice blasting achieves 100% mold spore removal in a single pass, and documented users consistently pass PRV clearance tests without biocide or encapsulant application.

Non-Toxic

Operator & Occupant Safety

Sanding and chemical remediation expose operators to harsh chemicals, abrasive debris, and physical strain, and can affect nearby occupants.

How We Comply

Dry ice is non-toxic, non-corrosive, and non-conductive—safe around electrical wiring—eliminating chemical fumes and abrasive debris while reducing operator strain.

Zero Waste

Spent Media and Chemical Waste

Sandblasting and chemical rust removers generate spent media, chemical waste, and wastewater that require cleanup and disposal.

How We Comply

Dry ice sublimates on contact, producing zero secondary waste—no spent media, chemical waste, or wastewater—eliminating disposal costs and environmental concerns.

Need to meet a specific standard?Talk to an application specialist
FAQ

Frequently Asked Questions

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.