dry ice plastic deburring tool removing burrs from machined part
Applications

Dry Ice Blasting Equipment for Deburring and Deflashing

Manufacturers of plastic parts require exacting standards of quality, dimensional accuracy, and surface finish, making burr removal and deflashing critical processes. Dry ice blasting precisely targets excess material without damaging surfaces, altering dimensions, or leaving residue or grit behind, delivers a more uniform finish than traditional methods, and can be fully automated.

Non-Abrasive

Preserves Tolerances

Zero Residue

No Grit Entrapment

Targeted

Precise Deburring

Contact Us
Overview

Summary

Cold Jet dry ice blasting deburrs and deflashes plastic and machined parts without abrasion, media, or secondary waste. The non-abrasive process removes burrs and molding flash from edges, holes, internal threads, and complex geometries—precisely targeting excess material without altering dimensions or tolerances, and leaving no grit entrapment or residue.

Quick Answer

How is dry ice blasting used in deburring and deflashing?

Dry ice blasting is a non-abrasive method for deburring machined parts and deflashing molded parts without altering dimensions or damaging delicate features. Solid CO₂ sublimates to gas on impact, removing flag, tear, and rollover burrs from machined parts and parting-line, gate, and vent flash from molded parts. It precisely targets excess material on edges, holes, internal threads, and complex geometries—reaching internal channels that tumbling and cryogenic deburring miss—without affecting surrounding surfaces. Because it is non-abrasive, it preserves tolerances, finishes, and geometries, improving consistency and reducing scrap. Because dry ice sublimates on contact, it leaves no media, residue, or grit entrapment, eliminating post-process washing and cross-contamination. It works on PEEK, nylon, ABS, titanium, Nitinol, and 3D-printed parts, and integrates into automated robotic deburring cells. Cold Jet has more than 24,000 machines installed globally.

dry ice blasting deburring part
Exploring dry ice blasting for your facility?Get expert guidance
Challenge

Remove Burrs and Flash Without Altering Dimensions

Removing burrs and flash is essential for tolerances, assembly, and safety, but it can't come at the cost of the part, especially with complex geometries. Traditional deburring struggles: manual filing is slow and inconsistent, tumbling treats the whole part and lodges grit and chemical residue in holes and cavities, creating cross-contamination risk, and shot blasting is abrasive and alters dimensions.


Cold Jet dry ice blasting is non-abrasive and precisely targeted. It removes burrs and flash from edges, holes, internal threads, and geometries other methods miss—without altering dimensions or tolerances. Dry ice sublimates on contact, leaving no media or grit entrapment, so parts are consistent and need no post-process washing.

Uniform Finish

More Consistent Than Manual Filing

Lower Scrap

Fewer Rejections

All

Burr Types

Automated

Robotic-Ready

Benefits

What are the Benefits of Dry Ice Blasting for Plastic Part Deburring and Deflashing?

Dry ice blasting is non-abrasive and enables safe and consistent deburring and deflashing

Dry ice deburring and dry ice deflashing is non-abrasive and preserves part surfaces and dimensional integrity. It’s a more efficient process for removing burrs from machined parts and removing flash from molded components. With a dry ice deburrer machine, you can effectively deburr edges, deburr holes, deburr internal threads, and deburr small parts. Dry ice blasting also improves part consistency and quality while reducing scrap rates and rejections.

Traditional deburring methods for plastic parts are often slow, labor intensive, and potentially damaging to delicate components. The process of removing flash from molded parts presents similar challenges, especially for parts with complex geometries. Deburring methods like manual filing, tumbling, and cryogenic deburring are inconsistent and can leave media lodged in part features. Media used in a tumbler leaves chemical residue, which can become entrapped in the part and can cause cross-contamination issues.

Dry ice deburring and dry ice deflashing is non-abrasive and preserves part surfaces and dimensional integrity. It’s a more efficient process for removing burrs from machined parts and removing flash from molded components. With a dry ice deburrer machine, you can effectively deburr edges, deburr holes, deburr internal threads, and deburr small parts. Dry ice blasting also improves part consistency and quality while reducing scrap rates and rejections.

Non AbrasiveNon-Abrasive

Non-Abrasive Deburring Process

Dry ice blasting is a non-abrasive process that preserves the integrity of plastic parts. The burr removal and deflashing process preserves the surface finish of parts and does not alter part geometries. In deburring plastic parts and deflashing plastic molded parts, you will maintain tight tolerances with dry ice blasting.

Reduce DowntimeFaster Deburring

Faster and More Effective Deburring

Dry ice blasting equipment delivers superior efficiency for deburring parts and removing flash from high tolerance plastic components. Dry ice effectively removes burrs, flash, and excess material leftover from machining and molding processes. It eliminates manual plastic deburring tools, which can be time consuming and often lead to inconsistent results.

Satisfaction / Improve Part QualityQuality & Consistency

Maintain Part Consistency and Quality

Dry ice burr removal and dry ice deflashing maintains part consistency and quality by helping manufacturers meet tight tolerances and improve overall part quality. Burr removal with dry ice ensures only the excess material is removed, which leads to a more uniform product and reduced scrap rates caused by dimensional variations.

Secondary WasteClean Parts

No Post-Deburr Cleaning Required

When deburring plastic, dry ice sublimates back to gas. The dry ice deburring tooling does not leave chemical residue, residual media, or other contaminants on finished plastic parts. It eliminates the need for post-process cleaning and prevents contamination issues, grit entrapment, and scrapped parts.

Applications

What Can Dry Ice Blasting Deburr and Deflash?

Dry ice deburring tooling is cost-effective for low-volume, high-value parts. Dry ice blasting is reliable and effective for plastic parts with complex geometries, parts that have tight tolerances, large parts that cannot fit in cryogenic deburring equipment, and parts with geometries that cannot be deburred with tumbling.

Validated For
  • Machined Plastic Components
  • 3D Printed/Additive Manufactured Parts
  • Aerospace Components
  • Injection Molded Parts
  • Medical Device Components
  • Consumer Products
  • Thermoset Molded Parts
  • Automotive Plastic Parts

Quickly Remove Burrs and Flash While Preserving Critical Dimensions with Dry Ice Blasting

Dry ice blasting enables plastic parts to be consistently and reliably deburred and deflashed. Dry ice ensures components remain within specified tolerances while removing unwanted material.

Precise and targeted deburring and deflashing

Dry ice blasting enables plastic deburring and plastic deflashing to be targeted to a specific area with burrs or flash without affecting surrounding surfaces or removing too much material. The dry ice deburrer machine accesses hard to reach areas like internal channels, small holes, and complex geometries. Tumbling the entire part can cause damage to areas of the part that didn’t need to be addressed.

Protects part dimensions and geometries

Dry ice is non-abrasive and will not alter part geometries. The deburring tooling and dry ice deflash process removes burrs and flash without altering the part’s dimensions, surface finish, or intricate details. This ensures critical part tolerances are consistently maintained, preventing costly rejections.

No residual media or entrapment

In plastic deburring and plastic deflashing, dry ice sublimates from a solid to a gas upon impact with the part. No residual media is left behind, which eliminates issues like grit entrapment in small holes or cavities, cross-contamination, and the need for washing and drying after the burr removal and deflash process.

Versatile burr and flash removal

Dry ice deburring tooling removes excess material, such as flag burrs, tear burrs, poisson burrs, and rollover burrs from machined plastic parts. Dry ice deflashing machines remove parting line flash, gate flash, and vent flash from molded parts such as those produced in thermoset molding and thermoplastic molding.

Dry ice plastic deburring tool removing burrs from machined part
Dry ice plastic deburring tool removing burrs from machined part
Automated deflashing of plastic parts with dry ice blasting
Automated deflashing of plastic parts with dry ice blasting
Hole deburring of plastic part with dry ice blasting
Hole deburring of plastic part with dry ice blasting
Effective on a variety of materials
  • PBT (Polybutylene Terephthalate)
  • LCP (Liquid Crystal Polymer)
  • PEEK (Polyether Ether Ketone)
  • Nitinol
  • Titanium
  • Acetal
  • ABS (Acrylonitrile Butadiene Styrene)
  • UHMWPE (Ultra-High Molecular Weight Polyethylene)
  • Acrylics
  • Stainless Steel
  • Nylon
  • PP (Polypropylene)
  • Phenolics
  • Polystyrene
  • Additively Manufactured Components / 3D Printed Parts
Industries

Dry Ice Cleaning is Used for Deburring Parts and Deflashing Parts in a Variety of Industries

Cold Jet offers a variety of dry ice plastic deburring tools and plastic deflashing machines. Our machines are being used in deflash processes and to deburr parts in a variety of industries.

Comparison

How Dry Ice Blasting Compares to Alternatives

See how dry ice blasting stacks up against traditional deburring and deflashing methods across the criteria that matter most in parts finishing.

Criteria
Dry Ice Blasting
Manual Filing
Tumbling
Shot Blasting
Laser Cleaning
Secondary Waste
None – sublimates to gas, no media
Low – filings and shavings
High – spent media and chemical residue
High – spent abrasive media
Low – vaporized residue needs extraction
Speed
Fast – targeted, automatable
Slow – hand work, part by part
Slow – long batch cycles
Moderate – plus masking and cleanup
Slow – point-by-point on features
Product Damage
None – non-abrasive, preserves dimensions
High – inconsistent, gouges surfaces
High – damages areas needing no work
High – abrasive, alters dimensions
Possible – heat can alter surfaces
Regulatory Compliance
Strong – no media, no chemicals
Inconsistent – operator dependent
Limited – media/chemical handling
Limited – dust and containment
Limited – VOC exposure
Downtime
Minimal – inline, no post-wash
High – slow manual labor
High – long cycles, then wash/dry
High – masking and cleanup
Moderate – slow per-feature setup
Environmental Impact
Low – recycled CO₂, no media
Low – but inconsistent, high labor
High – spent media and chemical waste
High – abrasive dust and disposal
Moderate – generates VOC & energy intensive
Comparing dry ice blasting to your current method?Talk to an application expert
What You Need

What’s Needed for Dry Ice Deburring and Deflashing?

A dry ice blasting system for deburring parts or in a deflash process relies on several key parts:

Dry Ice Blaster

Step 01

Dry Ice Blaster

The foundation of your plastic parts deburring and deflashing program starts with a reliable and easy to use dry ice blasting system. Cold Jet offers a variety of machines to choose from, including models with features like our patented Particle Control System (PCS®). The PCS enables you to fine-tune blasting parameters and particle size to adjust deburring power from very gentle to more aggressive. The systems will come complete with a blast and air hose, an applicator, and a nozzle that is best suited for your application.

  • 01. Dry Ice Blaster — The foundation of your plastic parts deburring and deflashing program starts with a reliable and easy to use dry ice blasting system. Cold Jet offers a variety of machines to choose from, including models with features like our patented Particle Control System (PCS®). The PCS enables you to fine-tune blasting parameters and particle size to adjust deburring power from very gentle to more aggressive. The systems will come complete with a blast and air hose, an applicator, and a nozzle that is best suited for your application.
  • 02. Compressed Air — Compressed air can be supplied from your facility’s existing filtered air system. For plastic part deburring, clean and dry air is critical. Cold Jet dry ice blasters typically need 100 cfm (2.8 m³/min) at 80 psi (5.5 bar) to operate effectively.
  • 03. Dry Ice Supply — A reliable supply of dry ice is needed to ensure you have dry ice when you need it. We can help you identify a dry ice supplier and recommend the amount you should order based on your needs. Once identified, establish a delivery schedule that aligns with your production schedules.
  • 04. Machine and Operator Training — Operators need proper training to use dry ice blasting effectively for deburring plastic components. Cold Jet offers a training course that teaches your team how to use the machine safely and correctly. The course covers essential operating techniques for effective deburring and safety guidelines.
  • 05. Personal Protective Equipment (PPE) — Parts finishing staff should wear proper safety gear, including gloves, hearing protection, and eye protection.
  • 06. Automated Deburring Machine (Optional) — Plastic part deburring processes using dry ice blasting are commonly automated. Fully automated dry ice deburring systems combine a dry ice maker, dry ice blaster, and robotic arm in one system for consistent, repeatable results.
Machine comparison

Which Dry Ice Blaster Fits Your Deburring and Deflashing Work?

Compare the Cold Jet blasters suited to finishing work, so you can match particle control and intensity to flash and burrs on molded plastic, rubber, and die-cast parts.

Specifications
Aero2® PCS® ULTRA
i3 MicroClean® 2
i3 MicroClean®
Particle Control
Variable(0.3mm to 3.0mm, 28 sizes)
Microparticles(Shaved)
Microparticles(Shaved)
Controls
Digital(7" LCD, Recipes, IoT)
Digital(7" LCD, Recipes, IoT)
Analog / Standard
Feeder Technology
Two-Stage + Defrost Cycle
Radial Feeder
Radial Feeder
Application Intensity
Versatile(Precision to Aggressive)
Delicate / Precision
Delicate / Precision
Automation & Integration Capable
Yes
Yes
No
Hopper Capacity
60 lbs(27 kg)
25 lbs(11 kg)
20 lbs(9 kg)
Not sure which blaster fits your process?Get a recommendation
Why Cold Jet

Why Invest in Cold Jet Machines for Plastic Part Deburring and Deflashing?

If you’re upgrading your plastic part deburring or deflashing process, investing in a Cold Jet dry ice blaster enhances your operation’s efficiency while maintaining the highest quality standards. When evaluating this capital investment, consider both the return on investment (ROI) and operational benefits specific to your plastic parts manufacturing facility. Cold Jet machines deliver faster ROI and greater value through:

cold jet dry ice blasters

Proven Deburring Technology

Our MicroParticle dry ice technology is tested and validated to effectively remove burrs without part damage in manufacturing environments.

Trusted Manufacturing Partner

With more than 24,000 machines installed globally and installations in leading manufacturing facilities, we’ve established ourselves as the trusted solution for dry ice deburring and deflashing.

Industry Leading Reliability

Our machines are built to last and have significantly longer machine life than competitors, ensuring consistent deburring and deflashing performance over years of operation.

Lower Operating Costs

Our dry ice blasters use significantly less dry ice, compressed air, and electricity than competitor machines. This reduces your daily operational expenses while maintaining the highest quality of deburring and safety.

Industry Leading Support and Training

Our regional technicians understand the unique requirements in plastic parts manufacturing environments and are always accessible. We deliver both maintenance services and comprehensive equipment operation training.

Application Specific Accessories

Cold Jet has a wide range of accessories, including applicators, blast hoses, and application specific nozzles. We will help you find the perfect nozzle for your plastic part deburring or dry ice deflashing application.

Ready to make the switch?Talk to us
Our customers

Plastic Parts Manufacturing customers around the world rely on Cold Jet

With a global install base of 24,000+ that consists of companies large and small – Cold Jet delivers valuable dry ice deburring equipment and dry ice deflashing equipment.

  • Abbott Laboratories logo
  • Health Care logo
  • North American Lighting Logo
  • BMW logo
  • stryker logo2015 1 logo
  • Samsung logo
Compliance

Supporting Quality, Cleanliness & Sustainability

Dry ice blasting helps parts manufacturers meet dimensional-quality, contamination-control, and environmental goals without abrasive media or chemicals.

Tight Tolerances

Dimensional Quality

Abrasive deburring and shot blasting alter part dimensions and surface finishes, causing rejections when parts fall outside specified tolerances.

How We Comply

The non-abrasive process removes only excess material without altering dimensions, finishes, or geometries, keeping parts within tolerance and reducing scrap and rejections.

No Entrapment

Contamination Control

Tumbling and media deburring leave grit and chemical residue lodged in holes and cavities, creating cross-contamination risks unacceptable in medical and aerospace parts.

How We Comply

Dry ice sublimates on contact, leaving no residual media, grit, or chemical residue—eliminating entrapment and cross-contamination and the need for post-process washing.

Zero Waste

Spent Media and Chemical Waste

Sandblasting and chemical rust removers generate spent media, chemical waste, and wastewater that require cleanup and disposal.

How We Comply

Dry ice sublimates on contact, producing zero secondary waste—no spent media, chemical waste, or wastewater—eliminating disposal costs and environmental concerns.

Need to meet a specific standard?Talk to an application specialist
FAQ

Frequently Asked Questions

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.