Customer StoriesDry Ice Cleaning

How to Safely Clean Hydroelectric Generators with Dry Ice Blasting

Matt Caminiti
Matt Caminiti
4 min read

TL;DR

A power generator that had been out of commission for years needed an adaptive cleaning solutions to adjust aggressions based on surface need. Sensitive parts needed a gentler clean while other parts required aggression. Dry ice blasting helped provide a delicate cleaning and high level aggression for the hydroelectric generator cleaning, protecting sensitive electronics.

A Pacific Gas & Electric (PG&E) hydroelectric generator in California had been out of service for several years.

The unit was in very poor shape and the main concern was to provide a gentle cleaning action that would not damage the delicate windings. Generator cleaning projects such as this one require very delicate cleaning for some areas, but more aggressive cleaning in others.

Coldsweep, Inc., a company that provides industrial cleaning services to the industry, was contacted for the job.

Power generator before dry ice blasting
Power generator before dry ice blasting

In order to place the unit back in service, the fragile insulation on the stator needed to be delicately cleaned without causing additional damage to the windings.

In the past, corn cob blasting and brushing or wiping with solvents have been used for generator cleaning. Corn cob blasting has proved to be too messy and hand cleaning with solvents is too time consuming and labor-intensive.

Coldsweep thought that dry ice blasting would be the perfect solution for the job.

Dry ice blasting systems use non-abrasive media in the form of recycled CO2 pellets that will not damage surfaces or equipment. The combination of dry ice cleaning’s kinetic energy and thermal effect break the connection between the dirt and surface, lifting away contaminants.

Learn how dry ice blasting compares to alternative methods

Unlike corn cob blasting and cleaning with solvents, dry ice cleaning:

  • Provides a clean-in-place solution
  • Is non-abrasive and will not damage sensitive equipment
  • Is non-conductive
  • Provides a completely dry cleaning process
  • Is environmentally responsible
  • Does not add secondary waste
  • Is able to get into tight nooks and crannies

The Results

The stator diameter was 10-foot with a 6-foot bore. This project used about 8,000 pounds of dry ice and took about six days to complete. This included time to erect containment, perform the dry ice cleaning, wipe down the generator and dismantle the containment.

Dry ice blasting power generation
“

We shaved both block ice and 3mm rice pellets with ease and experienced no issues. The SDI Select 60 performed wonderfully to clean the delicate windings.

”
— Randell Heath, Founder and Owner, Coldsweep, Inc.

Several nozzle configurations were used for this project, and varied in width/blast swath from .8 inches up to 2 inches. Narrower nozzles were used to clean the fragile portions of the windings and wider nozzles were used to speed up the cleaning in areas that could tolerate more aggressive cleaning.

Where there was easy access, longer nozzles were utilized. For the end turns on the top and bottom of this vertical unit, 8-inch long nozzles were used because of the tight working quarters.

Learn about dry ice blasting in power generation

It was important that the cleaning action could be precisely controlled with various nozzle types and sizes.

“

We shaved both block ice and 3mm rice pellets with ease and experienced no issues. The SDI Select 60 performed wonderfully to clean the delicate windings at pressures that varied between 30 and 50 PSI. The unit was also used to clean the cast iron portions of the generator housing at higher pressures up to 125 PSI. I did not have access to high-pressure air at this worksite, but the possibility of performing three different types of dry ice cleaning (dry ice dusting, traditional, and high-pressure) with one machine is very compelling for us. It was especially convenient to be able to place the SDI Select 60 outside of our containment because it simplified loading the dry ice into the machine. The ability to run 40 feet or more of hose into the work area made this job go twice as fast because there was not enough room for two machines inside the stator bore.

”
— Randell Heath, Founder and Owner, Coldsweep, Inc.

Coldsweep carefully cleaned the unit, taking care not to over-clean areas that could not tolerate it.

The customer was very pleased with the results and brought other hydro users on site to see how they were successfully cleaning the unit. The generator is now fully back in service.

“

With the ability to shave with any dry ice media, it eliminates worries about dry ice availability, opens up opportunities for new territories and applications, and expands our capabilities. Many people within the company originally felt that this generator might be beyond salvage, but once again, Cold Jet seems to make the impossible a little easier to achieve.

”
— Randell Heath, Founder and Owner, Coldsweep, Inc.

Key Takeaways

  • A Pacific Gas & Electric (PG&E) hydroelectric generator in California had been out of service for several years and needed an adaptable cleaning method
  • Traditional cleaning methods such as hand cleaning with solvents and corn cob blasting proved to be too time consuming and too messy to clean up
  • Dry ice blasting provided a faster cleaning solution that was gentle of sensitive components and aggressive on stronger contaminants

More about dry ice blasting equipment for ethanol plants

Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.