Customer StoriesDry Ice Cleaning

How to Restore an Authentic Log Home with Dry Ice Blasting

Matt Caminiti
Matt Caminiti
4 min read

TL;DR

Bonazza Dry Ice Blasting was able to maintain quality standards and save six days of work by using dry ice blasting to quickly and easily remove layers of stain on a cedar log home to prepare the surface for renewal. Other methods were considered, but the dry, non-abrasive nature was chosen for better preserving the wooden exterior of the home.

Restoring a Log Cabin with Non-Abrasive Dry Ice Blasting

In order to properly restore a log home, the exterior must be thoroughly cleaned, sanded, and then stained. If the surface is not cleaned thoroughly to remove all contaminants, the new layer of stain and sealant will not adhere correctly and will not last long-term.

Oftentimes, there are multiple layers of stain that need to be cleaned and removed before a new layer can be added and the log home’s exterior fully restored.

A home owner in Bonfield, Ontario, wished to restore his 15-year-old cedar log home and bring it back to its original beauty. Over the years, the exterior stain had begun to peel and become layered with dirt and mold. The exterior had been re-stained multiple times but never cleaned in between, causing a 15 year buildup of stain, dirt and mold. In order to put on a fresh, new coat of stain, all of the old layers must first be removed. The team at Bonazza Dry Ice Blasting was contacted to do the job.

Traditional Methods Were Not Viable

Traditional methods of surface preparation were considered, including pressure washing, but the water would get into the wood and cause the stain to peel sooner.

Blasting with corn cob, sand, soda, walnuts and glass would be too abrasive and cause a large mess. Chemical stripping was an alternative but would introduce safety and environmental considerations, as well as add additional time to the project as the wood would need to dry after the chemical treatment. Hand sanding as an option would be extremely time and labor intensive. In order to properly re-stain and restore the home, a less aggressive and more efficient cleaning method was needed.

Learn about dry ice blasting for restoration projects

Dry Ice Blasting Chosen to Restore the Home

Cleaning with dry ice blasting was the perfect solution because it uses non-abrasive media in the form of recycled CO2 pellets that will not damage surfaces. The dry ice media is introduced into a pressurized air stream at user-controlled speeds and sublimates – or turns back into a gas – upon impact, lifting away the contaminant safely, without leaving behind any secondary waste or residue.

Cedar home before and after
“

Dry ice cleaning can take years off the look of a log home. It takes a thin layer of wood off all the logs – about 1/16 of an inch – leaving all of the milling marks. This is a great way to rejuvenate the interior and exterior of a log home.

”
— Vinni Bonazza, Owner, Bonazza Dry Ice Blasting

Dry ice cleaning is odorless, does not add moisture back to the wood and can be done cleanly, with no hazardous solutions dripping on workers. It can be used on all types of wood, including pine, fir and cedar. Even though cedar shakes are soft and thin, dry ice is soft enough not to penetrate too deeply or damage the wood. Dry ice also works well on cleaning teak, one of the hardest types of wood to clean or strip.

Dry Ice Blasting Delivered Results

The team at Bonazza Dry Ice Cleaning used a dry ice blasting machine to clean a total of 1,600 square feet on the exterior of the cabin. The nozzle used allowed them to clean at a steady pace because the dry ice particles were moving at a continuous flow. Once fully cleaned, the surface was lightly sanded and then two fresh coats of stain were applied to complete the restoration process.

The entire log home restoration project time included:

  • 24 hours of cleaning and surface preparation with dry ice
  • 1,500 lbs. of dry ice pellets
  • 52 hours of sanding
  • 33 hours of staining
“

The project was on schedule and incredibly fast. We saved at least three to four days when compared to sand or corn blasting and two days of sanding time. The log home looks brand new – it came out 110%.

”
— Vinni Bonazza, Owner, Bonazza Dry Ice Blasting

Key Takeaways

  • A 15-year-old log home needed an effective, but non-abrasive method for removing contaminants and old staining
  • Pressure washing would have gotten into the wood and caused premature stain peeling
  • Dry ice blasting was chosen as a non-abrasive, dry cleaning method for safely removing contaminants for later resealing
Contact

Need an effective yet safe way to restore wooden surfaces?

Contact Cold Jet to discover the gentle cleaning power of dry ice blasting