Customer StoriesDry Ice Cleaning

How to Remove Asphalt Buildup from Vehicles with Dry Ice Blasting

Matt Caminiti
Matt Caminiti
4 min read

TL;DR

An asphalt paving company was using four workers to clean asphalt residue from their vehicles and equipment by hand with chemicals over 10 hours. Dry ice blasting provided a more efficient cleaning of asphalt buildup in just 4 hours with one worker. This process did not damage the equipment, leave any secondary waste, or create downstream contamination.

Removing Asphalt Residue with Dry Ice Blasting

An Ontario construction company specializing in highway asphalt paving chooses dry ice blasting over manual methods to quickly and efficiently clean transport vehicles.

The company remains busy with major construction projects throughout most of the year. With their machines in constant use, it is not possible to clean them until the off-season when work begins to slow.

Washing away the accumulated layers of asphalt from the Material Transfer Vehicle's (MTV) intricate parts required excessive time and manpower. The company needed a more efficient method for cleaning MTVs to keep the vehicles operating continuously.

The Problem

Cleaning the company's MTVs, including the hopper, auger and two large chains, required four workers manually scraping and picking the machine parts with chisels, water and chemicals. This process took over ten hours.

The cleaning chemicals contaminated the asphalt that is chipped away, preventing it from being dumped back into the mixer and recycled. The steel on steel chiseling and abrasive chemicals also risk damaging the links.

Sandblasting proved to be an equally ineffective solution, leaving grit in the chain links and rollers, further contaminating the leftover asphalt. This method also resulted in an additional expense to collect and dispose of the sand.

The company needed a way to:

  • Clean MTVs without taking them out of service
  • Reduce manpower and hours required to clean parts
  • Preserve leftover asphalt without contamination
  • Clean without damaging MTV components

The Solution: Dry Ice Blasting

Dry ice blasting asphalt removal

Dry ice blasting was a great option for this company because it cools the asphalt on contact, making it easier to remove and leaving the original substrate undamaged.

The dry ice blasting process uses non-abrasive media in the form of recycled CO2 pellets that won’t damage surfaces or equipment. The combination of dry ice cleaning’s kinetic energy and thermal effects break the connection between the dirt and surface, lifting away contaminants.

Learn about dry ice blasting for contractors

Unlike blasting with other media, dry ice cleaning:

  • Does not leave any secondary waste
  • Is safe and non-toxic
  • Does not create downstream contamination

The Results

1. Efficient cleaning

Using Cold Jet’s Aero 40FP with a high flow MERN nozzle, local contractor Go Green Dry Ice Blasting successfully removed all the asphalt buildup on the MTV's hopper, auger and chains.

“

We were able to break down the asphalt totally. It didn’t matter how thick it was or where it was—we could break it down and take it off with the dry ice blasting. And we didn’t go overly excessive with the aggression or the air pressure.

”
— Wes Donaldson, Contractor, Go Green Dry Ice Blasting

2. Faster cleaning

Using 400 pounds of dry ice, Go Green was able to clean 12 square feet in less than one minute by blasting at 150 PSI with a 400 CFM compressor at five pounds a minute. Go Green cleaned the MTV in four hours with a one man team compared to the previous method, which took ten hours and a four man team.

asphalt removal with dry ice blasting
Asphalt removal with dry ice blasting

3. Non-abrasive

The paving company also liked the fact that dry ice blasting is non-abrasive and will not damage the expensive parts of the machinery.

“

When you come in with something non-abrasive, they absolutely love it because they know that when you’re blasting a tough piece of debris that you’re not damaging their equipment, one of the links, or a weld.

”
— Wes Donaldson, Contractor, Go Green Dry Ice Blasting

4. No secondary waste

Dry ice blasting also did not leave any secondary waste when the job was complete. Only the discarded asphalt remained. This eliminated the added time required to collect and dispose of additional waste and allowed the company to reuse the discarded asphalt.

Donaldson recommends dry ice blasting for cleaning asphalt off any machinery:

“

Dry ice blasting is definitely the best option for cleaning asphalt off of equipment. It’s faster, more efficient, and is a safer alternative. It’s also non-abrasive and there’s no water or harsh chemicals mixing in with their asphalt.

”
— Wes Donaldson, Contractor, Go Green Dry Ice Blasting
Before dry ice blasting asphalt removal
Before dry ice blasting
after dry ice blasting asphalt removal
After dry ice blasting

Key Takeaways

  • An asphalt paving company was using four workers to clean asphalt residue from their vehicles and equipment by hand with chemicals over 10 hours
  • The company needed a cleaning method that saved time, reduced labor costs, did not damage equipment, and preserved unused asphalt
  • Dry ice blasting offered strong cleaning that did not damage equipment, cut cleaning time to 4 hours with one worker, and produced no additional waste
Contact

Ready to Get Started?

Contact us today to discover how our dry ice cleaning machines can enhance your process.