Customer StoriesDry Ice Cleaning

How to Fully Clean a Jet Turbine Engine with Dry Ice Blasting

Matt Caminiti
Matt Caminiti
4 min read

TL;DR

Rolls Royce needed a faster cleaning solution for its jet engines, which was slow and risky for workers. The turbine engine blades were cleaned with automated dry ice blasting, enabling cost savings of 90% in cleaning costs, 84% improvement of module/component turn time, no damage to rotor blades, and removed exposure risk to chemicals or injury to personnel.

How Do You Clean a Jet Engine with Dry Ice Blasting?

Gas turbine engines are used to power aircraft, watercraft and power generators.

Typically they include an engine core, which has a compressor, a combustor and a turbine. The compressor pressurizes air to the combustor. In the combustor, fuel is mixed with the high pressure air and is ignited. Hot gas is created as a product of the reaction and is directed into the turbine where energy is extracted to drive the compressor and the fan.

Dirt and grime accumulates from atmospheric air and fuel burned during operation.

As dirt and grime build up in turbofan engines, the performance of those engines may be reduced due to aerodynamic and frictional losses.

The compressor plays a key role in the optimum performance of a jet engine. Any impairment of efficiency has a significant impact on operating costs and maintenance intervals. Depending on the operating environment, dust, salts and exhaust gas deposits are major causes of reduced performance, resulting in higher fuel consumption and increased turbine wear.

Proper cleaning of the compressor significantly reduces operating costs and ensures peak performance of the jet engine.

Rolls Royce, a manufacturer of gas turbine engines, was using a manual cleaning process to remove the buildup from titanium compressor blades.

It required workers to scrape and scrub the blades with a combination of water and other cleaning chemicals. This method:

  • Was time consuming
  • Was labor intensive
  • Had the potential to damage the blades
  • Was hazardous to the personnel who performed the cleaning (Compressor blades have very sharp corners and the workers were at risk of being injured.)

The Solution: Dry Ice Blasting

dry ice blasting jet engine aerospace
Dry ice blasting jet engine

Rolls Royce tested dry ice blasting and found that the effect of the process on the material microstructure was minimal.

After the successful tests, dry ice cleaning was approved to be used in the cleaning of the compressor blades. An approval letter for the use of dry ice blasting was granted by Rolls Royce for the cleaning of aircraft turbine titanium compressor drum assemblies.

Dry ice blasting uses non-abrasive media in the form of recycled CO2 pellets that will not damage surfaces or equipment. The combination of dry ice cleaning’s kinetic energy and thermal effects break the connection between the dirt and surface, lifting away contaminants.

Learn more about how dry ice blasting works

Benefits of dry ice cleaning include:

  • It is non-abrasive and will not damage sensitive parts
  • No secondary waste (dry ice sublimates back to gas)
  • Environmentally responsible, safe and non-toxic
  • No downstream contamination
  • Reduces or eliminates employee exposure to dangerous chemical cleaning solutions

Learn more about dry ice blasting in aerospace

The Results

Rolls Royce was happy with the results of the dry ice blasting process and decided to integrate the process in their maintenance of the turbine engines. The company also utilizes it to clean the compressor rotor between the blades, the compressor guide vanes, stators and casings.

Rolls Royce installed an automated system (robotic manipulator) using a dry ice blaster and a sound proof enclosure to avoid noise disturbance during the cleaning process.

1. Cost savings

By using the automated cleaning process, cost savings on compressor rotor blade cleaning improved by 90% and the module/component turn time improved 84%.

2. No risk of damage

Dry ice is non-abrasive and did not damage the surfaces of the the rotor blades.

3. Improved environmental and worker safety

Rolls Royce eliminated the use of chemicals in the cleaning process and decreased employee exposure to harmful chemicals.

Dry ice cleaning also made the cleaning process safer for their employees. They can stand at a safe distance and clean the blades without directly coming into contact with them.

dry ice blasting jet engine turbine blades
Dry ice blasting jet engine turbine blades

Key Takeaways

  • Rolls Royce wanted to find a more efficient alternative to its traditional cleaning of jet engine turbines, which was time-consuming and labor intensive
  • The cleaning was done by hand with water and chemicals, but posed damage risk to turbine blades and injury to personnel
  • Automated dry ice blasting provided faster cleaning that saved 90% on cleaning costs, did not damage rotor blades, and decreased chemical exposure and injury
Contact

Looking to add automated cleaning to your process?

Contact Cold Jet to learn more about automated dry ice blasting solutions!