Industry InsightsDry Ice Cleaning

Why Dry Ice Blasting Provides the Best Clean in Aluminum Packaging

Matt Caminiti
Matt Caminiti
2 min read

TL;DR

In the aluminum packaging production process, manufacturers commonly face problems with grease, oils, and release agents on conveyor belts, rollers, electrical panels, and mixers. Previously, equipment was cleaned by hand with solvents and scrapers. Dry ice blasting thoroughly cleans the incrustations on the equipment while it is in operation, maximizing production control and efficiency.

Cleaning Machines That Make Aluminum Cans with Dry Ice Blasting

In an aluminum packaging production process, it is very common for manufacturers to face problems with grease, oils and release agents in conveyor belts, rollers, electrical panels and mixers.

Usually, companies clean their machines with solvents, chemicals, scrapers, chisels and emery boards, which requires significant labor efforts and significant downtime.

Dry ice cleaning methods allow packaging producers to clean critical areas of their molds on the machine at operating temperatures without creating any secondary waste.

FoodBevPackaging_Tin_Can_UZ_08012020_Before&After

Manual Methods Cleaning vs. Dry Ice Cleaning

Dry ice blasting uses recycled CO2 in the form of solid dry ice particles that are carried by a high velocity air stream to remove surface contaminants. The dry ice particles sublimate on impact from a solid into a gas, leaving no secondary residue.

Unlike manual methods, cleaning with dry ice:

  • Allows cleaning on site: requires minimal dismantling and no loss of production hours
  • No damage to surfaces: dry ice cleans more effectively than manual methods without leaving any secondary residues
  • Reduces scrap and waste rates

Where in the production process of aluminum packaging can dry ice cleaning solve problems?

1. Die cleaning
2. Cleaning of ovens with varnish application

Aluminum Can Packaging HornoSecado before
Before
Aluminum Can Packaging HornoSecado after
After

3. Cleaning of equipment with paint and over-varnish spray

Aluminum Can Packaging Overspray before
Before
Aluminum Can Packaging Overspray after
After

4. Cleaning of labelling machines and adhesives

Aluminum can packaging Pegamentos before
Before
Aluminum can packaging Pegamentos after
After

5. Cleaning of conveyors, conveyor belts and rollers
6. Cleaning of electrical panels and sensors
7. Cleaning of mixers and packers

Dry ice blasting deeply cleans the equipment while it's running, maximizing production control and efficiency.

Learn more about dry ice cleaning for other packaging equipment

Key Takeaways

  • Cleaning machines in the aluminum can packaging industry demands a precise method that leaves no residue behind or damages parts
  • Dry ice blasting cleans dies, ovens with varnish applications, machines covered in overspray, labeling machines, adhesives, conveyors, rollers, mixers, electrical panels and sensors, & packers
  • Aluminum can packaging facilities can cut down their cleaning time and labor costs with dry ice blasting
Contact

Need a cleaning solution for your manufacturing facility?

Contact Cold Jet to find the best blasting