Customer StoriesDry Ice Cleaning

Commercial Printer Cleans Sensitive Components with Dry Ice Blasting

Matt Caminiti
Matt Caminiti
3 min read

TL;DR

InfoPrint Solutions Company found the unique features of dry ice blasting to be effective in refurbishing its print presses. Since dry ice is non-abrasive and non-conductive, printing machine inner workings and sensitive electronics could be cleaned effectively without the need for disassembly or causing damage. Dry ice blasting was able to cut down cleaning time and labor needed to clean.

Meet InfoPrint Solutions

InfoPrint Solutions Company was formed in 2007 as a result of a joint venture between IBM’s Printing Division and Ricoh. The company combines IBM’s more than 40 years of enterprise printing experience with Ricoh’s office solutions leadership delivering a variety of hardware, software and services, including high end workgroup, production and industrial printers.

In addition to providing new solutions, the company also has an extensive refurbishing process that restores used printers to like-new condition.

The Problem

Key to the refurbishing process is making sure that the printer is cleaned thoroughly. InfoPrint’s high-end continuous forms printers, for example, are known for their quality and durability with production speeds of more than 150 impressions per minute.

The printers are typically used in environments that demand a lot from their printers, so when used printers are returned to InfoPrint for refurbishing, they come with baked on residual toner and other contaminants that can be difficult to remove.

For Gary May, manufacturing engineer for InfoPrint, cleaning a returned printer can take two people up to eight hours; the most difficult and tedious part being removing the residual toner.

scrub the equipment by hand with chemical solvents

“

While our cleaning solutions did not impact our refurbishing process to the point of the quality of the end-product, we did have to work hard to achieve the desired result. As we recently had a successful ISO 14001 audit and are in the process of obtaining certification, we wanted to reduce our dependence on chemical solvents. We tried several milder cleaning solutions, but none worked very well. It was during this evaluation process that we had a demonstration of Cold Jet’s precision dry ice blast cleaning systems. We were impressed with its ability to clean the contaminants from the printer safely, which also minimized our need to use chemicals.

”
— Gary May, Manufacturing Engineer, Ricoh

The Solution

InfoPrint installed a dry ice blasting system. The precision system allows InfoPrint to clean delicate surfaces and hard-to-reach cavities that can be difficult to access by hand. The system also allows users to control the velocity and size of the dry ice, and features nozzles that can blast dry ice the size of pencil lead.

Dry ice blast cleaning uses recycled CO2 in the form of solid dry ice particles that are transported by high-velocity airflow to remove contaminants from surfaces.

The dry ice particles are accelerated through high-velocity nozzles to impinge upon the surface being cleaned. The combination of the kinetic and thermal gradient effects breaks the bond between the toner residue and the surface; the toner falls away from the surface and is easily removed.

The dry ice particles sublimate (transition from a solid to a gas without passing through the liquid stage) upon impact, leaving no other cleaning by-product, and therefore eliminating the added cost and inconvenience of secondary waste treatment and disposal.

Dry ice blasting is also a dry process, and therefore non-conductive, meaning it can be used to safely clean electronic components.

Learn more about dry ice blasting

“

The fact that dry ice blasting is a non-abrasive and dry cleaning process is important when considering the delicate parts we are working with inside a precision printing system.

”
— Gary May, Manufacturing Engineer, Ricoh
Infoprint before cleaning with dry ice blasting
Before dry ice blasting
Infoprint cleaned gears by dry ice blasting
After dry ice blasting

Key Takeaways

  • InfoPrint Solutions Company wanted a more efficient method for refurbishing used printers and removing baked on residue
  • Traditional hand scrubbing of printer parts took two workers up to 8 hours to clean
  • Dry ice blasting was able to clean printing parts safely and quickly without disassembly due to dry ice's non-abrasive nature
Contact

Ready to clean your intricate parts and electronics effectively?

Contact Cold Jet to learn more about how dry ice blasting can clean electronics, tight spaces, and more with non-abrasive media!