Customer StoriesDry Ice Production

Automotive Supplier Produces High Quality Dry Ice On Site

Matt Caminiti
Matt Caminiti
4 min read

TL;DR

KSPG AG wanted to produce dry ice on-site for dry ice blasting efforts, but found the old pelletizer to be inefficient. A Cold Jet pelletizer was chosen to replace the inefficient machine to keep up with the demand for the company's dry ice cleaning needs. The Cold Jet machine proved to produce more high-quality dry ice with less maintenance.

KSPG AG Produces Dry Ice

KSPG AG is the parent company of Rheinmetall’s Automotive sector. As a global first-tier supplier to the automotive industry, KSPG commands foremost positions in the product and component segments air supply, emission control and pumps as well as in the development, manufacturing and aftermarket supply of pistons, engine blocks, and plain bearings. The products are developed in cooperation with leading automotive manufacturers.

The company is divided into divisions: Hardparts (including KS Aluminium-Technologie GmbH), Mechatronics and Motor Service. The engineering and casting of innovative aluminum cylinder crankcases has evolved into a widely demanded core capability of KS Aluminium-Technologie GmbH (KS) in its role as direct development partner in the auto industry.

The company is among the leading producers of such cylinder blocks and a market leader in the premium segment for these products. From its plant in Neckarsulm, KS supplies many leading German and international carmakers with aluminum engine blocks for use in gasoline and diesel engines.

Among the series-production casting techniques employed are:

  • Low-pressure permanent mold casting
  • Pressure die-casting
  • Squeeze casting

KS began to clean their molds and production equipment with dry ice blasting because their previous method, sand blasting, was too abrasive on their equipment.

Due to the cleaning application, it was clear for KS that they also wanted to produce dry ice themselves, as it was difficult to purchase dry ice at the time and they wanted to have fresh dry ice on hand to make cleaning more effective.

The Problem

In the beginning, KS used a pelletizer that was built with outdated technology and led to higher CO2 consumption and thus higher costs. An additional problem was the cost of repair as the pelletizer was very susceptible to breakdowns.

The machine could no longer be operated reliably and KS often had to order dry ice from outside the company.

Werner Fiedler of KS comes from the production section and knows the needs and concerns on the workfloor. He led the effort to identify a new pelletizer.

dry ice production applications cold chain management
Dry ice production in action

The Solution

KS always wants to be on the cutting edge of technology, so they decided to buy a new Cold Jet pelletizer.

“

If there is a weak link in the production process, the whole production suffers.

”
— Werner Fiedler, Production, KS AluTech GmbH

The company already had experience with Cold Jet through their dry ice cleaning equipment and decided to contact them about the purchase of a new pelletizer.

“

After a very convincing onsite presentation from the European General Manager to our production department, we decided to go for the Cold Jet P325 with a production capacity of 136 kg/hour. The pelletizer is the only one on the market that can produce high-density premium dry ice and is still very compact. Less scrap ice, a longer shelf life and a higher density means higher cost savings for KS.”

”
— Werner Fiedler, Production, KS AluTech GmbH

Learn more about dry ice production

The Results

The entire project was implemented within three months. The most important factor in the purchase decision was the efficiency of Cold Jet pelletizers.

KS had complete confidence in Cold Jet and their service. Another important point was the ease of use.

“

We work in different shifts. That means that the pelletizer will be operated by several employees. The old pelletizer was not user-friendly and an error by the operator or possible damage was inevitable. We no longer have this problem with the new pelletizer. This is a very important point in practice.

”
— Werner Fiedler, Production, KS AluTech GmbH

KS expects the new pelletizer to:

  • Reduce maintenance time
  • Increase product lifetime
  • Improve product and ice quality
  • Reduce ice consumption during cleaning by using high-quality dry ice.

Fiedler especially liked the function of the automatic timer and the start and stop function with automatic shutdown of the pelletizer. Every step has been coordinated with all participating companies.

“

From the initial inquiry to the installation, we are very satisfied. The employees of Cold Jet were very friendly, reliable, and supported us throughout implementation. We look forward to future collaboration with them and the potential for future pelletizer purchases.

”
— Werner Fiedler, Production, KS AluTech GmbH

Key Takeaways

  • KSPG AG already used dry ice blasting to clean molds and production equipment, but struggled to source dry ice and wanted to produce it on-site
  • An outdated pelletizer machine was being used, which required more maintenance, used more LCO2 to create dry ice, and produced lower quality dry ice
  • The inefficient pelletizer was replaced with a Cold Jet pelletizer that produced more high quality dry ice while remaining compact
Contact

Looking for a high-quality dry ice production setup?

Contact Cold Jet to discover the best dry ice production setup for your facility!