Industry InsightsDry Ice Cleaning

3 Critical Uses for Dry Ice Blasting in the Automotive Industry

Rachael Barnes
Rachael Barnes
4 min read

TL;DR

Dry ice blasting is quickly becoming an essential part of the automotive manufacturing industry. While dry ice blasting can be used for industrial cleaning, it can specifically be used to clean automotive and tire molds, clean weld lines of slag and splatter, clean coating from part rollers, and prepare surfaces for coating and paint.

1. Mold Cleaning

Dry ice blasting systems have helped automotive molders meet stringent industry demands such as 6-Sigma, Kaizen, 5S and TPM (Total Productive Maintenance). Dry ice blasting allows operators to clean molds while they are still hot and in the press. Cleaning with dry ice enables molders to optimize their manufacturing process by cleaning contaminants from cavities, vents and hard-to-reach places faster, better and more economically than traditional methods. This can reduce cleaning times by as much as 75% and decrease annual mold cleaning costs by as much as $50,000.

Dry ice blasting has reduced downtime by up to 80% when cleaning:

  • permanent aluminum molds
  • blow molds
  • compression molds
  • plastic injection molds
  • tire molds
Cleaning rubber tire mold with dry ice blasting
Cleaning rubber tire mold with dry ice blasting

Tire Molds

A major problem faced by tire manufacturers is mold fouling. Build-up of cured material and mold release agents causes sticking molds, blemishes and unwanted flash on final parts, making them unusable and requiring press shutdown for cleaning.

Dry ice blasting helps tire molders:

  1. Clean tire molds in place; no cool down required
  2. Reduce production shutdown
  3. Reduce product scrap
  4. Clean molds without causing damage
  5. Reduce cleaning time and labor costs
  6. Provide an environmentally responsible clean with no secondary waste

Learn more about the benefits of cleaning molds with dry ice blasting

2. Weld Line Cleaning

Weld slag is made up of small, high temperature, high velocity metallic particles that are released during resistance welding. Accumulation of weld slag, grease, sludge, and sealant result in operational problems. Removing weld slag is a key component in cleaning robotic weld cells.

Contractor cleans weld slag with dry ice blasting
Contractor cleans weld slag with dry ice blasting

Dry ice blasting provides an effective and economical no contact solution for removing weld slag and spatter buildup. Dry ice cleaning helps welders:

  1. Reduce scrap rates
  2. Minimize downtime
  3. Clean without damage to sensors and other delicate components
  4. Maximize tooling life
  5. Clean without secondary waste
  6. Clean online, no cool down required
  7. Replace ineffective and costly labor intensive cleaning methods

Learn more about dry ice blasting weld lines

3. Paint Lines

Prior to the painting, cars and auto body frames move through an enclosed area where a gray like substance called e-coat is sprayed on the auto frame. E-coat is a protective layer applied before paint in order to prevent rusting. The rollers that carry the auto frames through this enclosed area accumulate buildup of e-coat which causes them to clog and slow down the process. When the rollers slow down do to clogging, there is an increase in production downtime and inefficiencies.

Pressure washing has been used to unclog the rollers, but this cleaning method creates over-spray and secondary waste, resulting in additional cleanup. Dry ice blasting can remove the e-coat material in a fraction of the time and can keep the rollers cleaner longer compared to pressure washing.

Automated dry ice blasting systems provide a uniform clean each time that helps to ensure a quality clean that reduces rejected parts. With the integration of an automated dry ice blasting system within the production line, the automotive industry is seeing further reductions in downtime, improvements in part quality, as well as a quicker ROI.

Key Takeaways

  • Dry ice blasting cleans many types of automotive molds, eliminating damage to sensitive surfaces and reducing downtime up to 80%
  • Dry ice blasting removes weld slag, grease, sludge, and sealants from robot platforms to reduce scrap rates, minimize downtime, and not damage sensitive components
  • Dry ice blasting removes excessive e-coat buildup from assembly rollers to minimize downtime, boost productivity, and reduce rejected parts
  • Dry ice blasting can be automated as part of the automotive manufacturing process
Contact

Ready to add dry ice blasting to your automotive manufacturing process?

Contact Cold Jet to find the right cleaning and product finishing solution!